Manual

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with

DMX, please read the DMX Primer on page #15.

1.) The ROCKLITE RGBW / RGBA is capable of operating with either 4 or 8 DMX

channels. To use the ﬁ xture in 4-channel mode, use the <MENU> button to

select

d001 on the LED Readout.

2.) To operate the ﬁ xture in 8-channel mode, use the <MENU> button to select

A001 on the LED Readout.

Stand-Alone, Master/Slave, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable

speeds.

1.) To set the ﬁ xture in Flash/Fade mode, select

FF01-FF99 (Fade Mode,

slowest to fastest) or

CC01-CC99 To conﬁ rm, press the <SAVE> button.

2.) To use the ﬁ xture in demo mode, select

dEoo, then press the <SAVE>

button to conﬁ rm.

3.) Each ﬁ xture is a master by default. To set the ﬁ xture as a slave, use the

<MENU> button to reach

SLAv, then press the <SAVE> button to conﬁ rm.

Sound Acitve Mode:

1.) To use sound active mode, select either

SouD.

2.) Press the <SAVE> button to conﬁ rm.

Manual Mode (Color Preset Mode):

Allows a single unit to display a variety of colors without a DMX controller.

1.) Reach the manual adjustment by using the <MENU> button to reach b001

. Adjust each color by using the <SAVE>, <UP> and <DOWN> buttons to se-

lect

r001-r255, g001-g255, b001-b255 or u001-u255 (Red,

Green, Blue and White, respectively), and adjusting between 1 (lowest) and 255

(highest) for each color.

To conﬁ rm, press the <SAVE> button.