User manual

Page 11

To Show the Fixture Running Hours:

1.) Select FhrS from the control panel, then hit <ENTER> to conrm.

Menu Conventions

Addr = “ADDR,” DMX Address Set/Adjust

ChNd = “CHMD,” Channel Mode Adjust

3/5/12 Ch = “3 Ch,” 3/5/12-Channel DMX Mode

SLNd = “SLMD,” Slave Mode Adjust

NASt = “MAST,” Master, set the unit to Master Mode.

SLAv = “SLAV” Slave, set the unit to Slave Mode.

StbY = “STBY,” Standby, unit is in Slave with no Master Fixture.

SHNd

SouN = “SOUN,” Sound Active Mode.

CoLo = “COLO,” Color Preset Mode.

Co XX = “CO 1 - CO31," Color Preset X.

AUto = “AUTO,” Auto (Color Snap) Mode.

FAdE = “FADE,” Color Fade Mode.

SP X = “SP 1 - SP 8,” Fade Speed 1-8 (Fast <-> Slow)

StCo = “STCO,” Color Strobe Mode.

Co XX = “CO 1 - CO31,” Color Preset X.

NANu = “MANU,” Manual Color / White Point Adjustment Mode.

REd = “RED," Adjust Red Intensity from 0 to 255.

GrEE = “GREE,” Adjust Green Intensity from 0 to 255.

bLuE = “BLUE,” Adjust Blue Intensity from 0 to 255.

ANbE = “AMBE,” Adjust Amber Intensity from 0 to 255.

UhIt = “WHIT,” Adjust White Intensity from 0 to 255.

FhrS = “FHRS,” Displays Fixture Running Hours

tESt = “TEST," Test Mode.