Blizzard Lighting, LLC www.blizzardlighting.
TABLE OF CONTENTS The Puck™ RGBAW LED PAR Can 1 1. Getting Started 3 What’s In The Box? Getting It Out Of The Box Powering Up! Getting A Hold Of Us Safety Instructions (Don’t Stick Your Hand In The Toaster!) 3 3 3 3 4 2. Meet The Puck™ RGBAW LED PAR Can 5 Features DMX Quick Reference (12-Channel Mode) DMX Quick Reference (3-Channel Mode) DMX Quick Reference (5-Channel Mode) The Puck™ RGBAW Pin-up Picture 5 5 6 7 7 3.
1. GETTING STARTED What’s In The Box? • 1 x Puck™ RGBAW Flat LED PAR Fixture • 1x IEC Power Cord • This Lovely User Manual Getting It Out Of The Box Congratulations on purchasing one way cool, way THIN LED PAR fixture! Now that you’ve got The Puck™ RGBAW (or hopefully, Pucks!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition.
SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture. • This product is intended for indoor use only. • To prevent risk of fire or shock, do not expose fixture to rain or moisture.
2.
DMX Quick Reference (3-Channel Mode) Channel What It Does 1 Dimmer (0-15 off, 16-255 Dim <--> Bright) 2 Strobe (0-15 off, 16-255 strobe slow <-> fast) 3 Color Select Value Red 001-004 ON 005-008 Green Blue Amber ON 009-012 ON 013-016 ON 017-020 ON 021-024 ON 025-028 ON 029-031 ON 032-035 ON ON ON ON ON 036-039 ON 040-043 ON 044-047 ON ON ON ON 048-051 ON 052-055 ON 056-059 060-062 ON 063-066 ON 067-070 ON ON 071-074 ON ON 075-078 ON 079-082 ON ON 083-
DMX Quick Reference (5-Channel Mode) Channel What It Does 1 Red Intensity 2 Green Intensity 3 Blue Intensity 4 Amber Intensity 5 White Intensity Figure 1: The Puck™ RGBAW Pin-Up Picture High Power LEDs Dual Mounting Yokes Figure 2: The Rear Connections DMX In DMX Out AC Power In/Out LED Control Panel Microphone The Puck RGBAW Manual Rev.
3. SETUP Fuse Replacement With a flat head screwdriver, wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power. Connecting A Bunch of The Puck™ RGBAW Flat LED PAR Cans You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in master/slave operating mode.
4. OPERATING ADJUSTMENTS NOTE: After making any change, the unit will return to the correct mode in about 10 seconds. DMX Mode Allows the unit to be controlled by any universal DMX controller. Addr on the LED 1.) The default mode for the fixture is DMX, which appears as Readout. Use the button then the and buttons to choose a channel between 1 and 512. Press again to confirm. 2.) To change between 3 and 6 channel DMX mode, select . Select either to confirm.
To Show the Fixture Running Hours: 1.) Select FhrS from the control panel, then hit to confirm. Menu Conventions Addr ChNd = “ADDR,” DMX Address Set/Adjust = “CHMD,” Channel Mode Adjust 3/5/12 Ch = “3 Ch,” 3/5/12-Channel DMX Mode SLNd = “SLMD,” Slave Mode Adjust NASt = “MAST,” Master, set the unit to Master Mode. SLAv = “SLAV” Slave, set the unit to Slave Mode. StbY = “STBY,” Standby, unit is in Slave with no Master Fixture. SHNd SouN CoLo = “SOUN,” Sound Active Mode.
Quick Tips & Tricks: Problem: The Puck LED readout says “StbY,” (Standby), no output.” Solution: The Puck is in Slave mode with no master fixture connected. Press
Troubleshooting Symptom Solution Fixture AutoShut Off Check the fan in the fixture. If it is stopped or moving slower than normal, the unit may have shut itself off due to high heat. This is to protect the fixture from overheating. Clear the fan of obstructions, or return the unit for service. Beam is Dim Check optical system and clean excess dust/grime. Also ensure that the 220V/110V switch is in the correct position, if applicable.
5. APPENDIX Keeping Your Puck™ RGBAW As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. You should absolutely keep the fixture clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks.
Tech Specs! Weight & Dimensions Length 8.25 inches (210 mm) Width 2.5 inches (63.5 mm) Height 8.25 inches (210 mm) Weight 4.0 lbs (1.8 kg) Power Operating Voltage 90-230VAC, 50-60 Hertz Fuse 3A 250V Power Consumption 20W Light Source LED 198x 10mm Red/Green/Blue/Amber/White 100K hrs. Optical Beam Angle 21 degrees 32 degree field Luminous Intensity 4,075 Lux @ 1m Thermal Max. Operating Temp.
The Puck RGBAW Manual Rev.
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting
