COMBINATION OVEN STEAMER INSTALLATION -- OPERATION -- MAINTENANCE BC-20G

Operation
17
Standard Controls
2
6
5
3
9
10
11
7
8
1
4
Figure 7
CONTROLS IDENTIFICATION
1. POWER ON LAMP --- when lit indicates power
to the unit is turned on.
2. MODE SELECTOR SWITCH --- t u r n s p o w e r
to the oven on or off. Allows selection of
Steam, Hot Air, Combi or Cool Down Modes.
3. TEMPERATURE DIAL --- used to set desired
cooking temperature.
4. HEAT ON LIGHT --- When lit indicates that the
unit is heating. The light goes off when the unit
has reached the set temperature.
5. STEAM ON DEMAND TIMER --- u s e d t o s e t
steam time
6. STEAM ON DEMAND SWITCH --- u s e d t o i n i -
tiate steam injection cycle
7. STEAM ON DEMAND LAMP --- i l l u m i n a t e d
when steam on demand is activated.
8. TIMER DIAL --- used to set desired cook time.
9. FAN SPEED SWITCH --- used to select low or
high speed.
10. DELIME LAMP --- Flashes when steam gener-
ator deliming is needed. Remains steady
when deliming process is active.
NOTE: BC14DS does not have a delime
lamp.
11. FILL LAMP --- illuminated until the steam gen-
erator is filled with water
NOTE: BC14DS, the direct steam unit, does
not have a fill lamp.