BCT and BLCT Series Combi Ovens Manual

28
Operation
The rack timing function enables you to set one or more
timers for each individual rack. This way you can cook
different products on the same rack or on different racks
as long as they can use the same cooking mode. The
rack timer can be used in Hot Air, Combi, CombiOptima,
Retherm and Steam modes.
TO COOK USING RACK TIMING
1. From the MAIN MENU, press the MANUAL key.
2. Select the desired cooking mode. Set the cook tem-
perature and humidity level if applicable.
3. Press the RACK TIMER key.
4. In the RACK SETUP list, drag your nger up or down
to select the number of racks you want to associate
with the timer. You can choose between 1-10 racks.
5. In the TIMERS PER RACK list, drag your nger up or
down to select the number of timers you want to as-
sociate with the rack(s).
6. Push the arrow button in the upper right corner to
continue.
7. Push the ACTIVATE TIMER key for the rack timer you
wish to start.
8. In the HOUR & MINUTES lists, drag your nger up or
down to set the desired cook time.
9. Push the RIGHT ARROW key ► in the upper right
corner to start the timer.
Blue buttons display the active timer settings and the
remaining time. The timer counts down to zero.
Yellow buttons display the active timer settings of
the timers that have reached the nal minute of the
countdown.
Green buttons and an alarm indicate that a rack timer
has nished its countdown. The display counts up the
time that has elapsed since the timer timed out.
10. Push the GREEN KEY to silence the alarm.
11. Push FINISH to end the timer.
Figure 19
Figure 20
Using Rack Timing