- BLODGETT CONVECTION OVEN INSTALLATION -- OPERATION -- MAINTENANCE KCO-25E

Installation

Oven Assembly

LEG A TT ACHMENT

NOTE: Before operating the KCO-25E, the unit

must be mounted on the legs provided.

1. Tilt the oven onto its back.

2. Screw 4” legs into four holes located near

oven corners.

3. Use a tool to tighten the hex nut at the top of

each leg.

4. Lift oven forward onto legs.

Figure 2

OVEN LEVELING

After t he oven is mounted on the legs it should be

leveled by screwing the adjustable leg feet in or

out as necessary. Check with a spirit level placed

on the top of the oven.

DOUBLE STACKING

1. Mount the lower section on legs as directed.

2. Set the upper section on the lower section.

3. Remove the two stacking straps from the bot-

tom unit.

4. Remove the bottom left and right screw s from

the upper section.

5. Re-attach the two stacking straps with the

screws removed in Steps 3 and 4.

Stacking

Straps

Figure 3