Specifications

Installation
5
Oven Assembly
LEG ATTACHMENT
NOTE: Before operating the KCOĆ25E, the unit
must be mounted on the legs provided.
1. Tilt the oven onto its back.
2. Screw 4" legs into four holes located near
oven corners.
3. Use a tool to tighten the hex nut at the top of
each leg.
4. Lift oven forward onto legs.
Figure 2
OVEN LEVELING
After the oven is mounted on the legs it should be
leveled by screwing the adjustable leg feet in or
out as necessary. Check with a spirit level placed
on the top of the oven.
DOUBLE STACKING
1. Mount the lower section on legs as directed.
2. Set the upper section on the lower section.
3. Remove the two stacking straps from the botĆ
tom unit.
4. Remove the bottom left and right screws from
the upper section.
5. ReĆattach the two stacking straps with the
screws removed in Steps 3 and 4.
Stacking
Straps
Figure 3