User Manual and Installation Guide

Owner’s Guide & Installation Instructions
51 / English
6 Preparation
1. Turn on both hot and cold water faucets fully. Check and be sure
the water connection is tight.
2.Placethelaundryinthedrum.
3. Add laundry additives (e.g. detergent, fabric softener,bleach).
Starting the program
1. Close the door
2.PresstheStart/Pausebuttontostarttheprogram.
3. The program follow-up light showing the startup of the program will
turn on.
4. The door locks and the door led will light up.
5. The led of the relevant step (prewash, main wash, rinse, softener
and spin) that the program has started from will light up.
C
CAUTION
• BeforepressingtheStart/Pausebuttonpleaseensurethatthe
frontdoorhasbeenclosedproperly.OtherwiseStart/Pause
button should be pressed again to start the program
• If no program is started or no key is pressed within 10 minutes
during the program selection process. The display and the
program follower indicators will turn off.
Door locking system
There is a locking system on the loading door of the product that
prevents the door from opening in cases when the water level is
unsuitable.
The ready light in the panel turns on when the loading door is locked.