User Manual and Installation Guide

56 / English
Front-Loading Automatic Washer
User maintenance instructions
Cleaning the door seal
Be sure to check the rubber door seal after unloading your washer.
Pullthesealbacktosearchforanyforeignobjects.Residualmetal
objects such as pins and coins may form rust stains on rubber seal,
and cause the seal to leak.
Wipe the stained areas with soapy water using a damp cloth. Then
wipe with a dry cloth properly. Do not use an abrasive scrubbing
agent when cleaning rubber seal.
Cleaning the drum
Check the wash drum for any foreign objects after unloading your
washer. Residual metal objects such as pins and coins may form
rust stains on drum surface and your clothes. Do not use abrasive
materials while cleaning the inner surface of the drum. Use soapy
water with a damp cloth to wipe the inner surface, then dry it and
leave the door open to let inside dry properly.
"TubSanitize" cycle with extra rinse option should be used for
monthly cleaning of drum. To carry out this procedure select "TubSanitize"
Program.