User Manual and Installation Guide

13 / EN
Dryer / User Manual
•Place the appliance on a solid floor. If
it is to be placed on top of a washer, the
approximate weight together may reach 397
lbs (180 kg) when they are full. Therefore,
the floor must be capable of carrying the load
placed on it!
3.6 Adjusting the feet
In order to ensure that your appliance
operates almost silently and vibration-free,
it must stand level and balanced on its feet.
The all feet of the appliance can be adjusted.
Balance the appliance by adjusting the feet.
C
Do not use any tools to loosen the
adjustable feet. Otherwise, they
may be damaged.
C
Never unscrew the adjustable feet
from their housings.
3.7 Ventilation duct and
connection
Ventilation duct ensures exhaust of air from
inside the appliance.
The vented dryer has 1 air outlet.
A
Only rigid or flexible metal duct
should be used for exhausting.
• In Canada, the diameter of the duct to
be used should be 4” (102 mm). In United
States, the regulation for the required
exhaust duct diameter must be followed.
Maximum duct length is given in the table
below:
Metal rigid duct
Maximum
length
72 ft (21.9 m) + 2 elbows
To connect a ventilation duct;
1.Connect the air outlet metal duct to the
spacer by turning it counter-clockwise.
2.Make the duct passages as shown in the
illustration below.