5728410000-AP
4 69.88” 1775mm 0.94” min . 50 m 1,96 m ” 9” 21.8 m m 556 21. 4 545 6” mm No Wooden Backwall 39.36” 999.8mm 1775 mm / 69.88 “ 70-70,39” /1778-1788 mm m 5” 22.0 60 mm 5 min. min . 30 m 11,8 m ” table djus x4 A t Foo 2.52” 0.63” 16 64 24.78” 70.43 " -74.80 " (1789 - 1900 mm) 2 max1,65” . 55 0m 629,6mm Ventilation 34 1.33” min. 200 cm2 100 3.94” 3.94” 100 .36” 60 2 200 cm2=31.000 in2 ” .
min. 1.96” min.75 mm 64 2.51” 34 1.33” 629.6 24.78” 16 0.62” 999.8 min.10 mm 39.36” min. 0.39” min. 11.8” min.30 mm 200 cm2 min. 7.87” min 200 cm2 min. 7.
1st Type Wood (1TW) X12 2nd Type Wood (2TW) X16 Sheet (S) X12 * Spares Included * Ersatzteile inklusive * Pièces incluses 1st Type Metric (1TM) X5 2st Type Metric (2TM) X5 Takoz / Wedge W2 X1 1 S 2 2” 23.2 m m 590 3 4 For 19 mm furniture thickness W2 43.3” 1100 mm 1 28.27” 718 mm 90 o Not: 2-3 numara ile gösterilen montaj adımında üst bağlantı plastiğini kaydırabilmek için bağlantının yapıldığı vidaları tam sıkmayınız.
4
When installing a twin non-ice unit adjacent to the ice maker unit model , same filler strip should be used to align furniture cabinet for each model . If the furniture cabinet dimension is 71,6”-72”/1818-1828 mm, long filler strip (5917500100) should be used. Furnitre cover dimensions are shown in picture. For 19 mm furniture thickness 718 mm 71.6 - 72 ” /1818 - 1828 mm 1140 mm 2” 23.
5 6 (2TM) 7 8 (2TM) 9 10 (1TM) 11 6
12 9” 1.5 m 5m . 0 4 40.5 mm 13 (1TW) 14-a 14-b 15 40.5 mm 9” 1.5 mm 5 40.
17-a 16 (1TW) 18 17-b (S) 40.5 mm 19 1,5 40.9” 5m m 40.5 mm (S) 20 1,5 40.
21 22 23 24 A T X = A+T- 0,23” (6mm) 26 25 X = A+T- 0,23” (6mm) 27 28 (2 TW) 9
29 30 10
31 B B 33 32 X = B+0,71” X = B+0,71” (18mm) 34 (18mm) 35 (2 TW) 36 11
37 38 12
38 X-axis Y-axis X-axis Z-axis 39 Y-axis X-axis Y-axis Z-axis 40 X-axis Y-axis Z-axis Z-axis Y-axis Z-axis (2 TW) 13
41 X-axis Y-axis X-axis Z-axis 42 Y-axis X-axis Y-axis Z-axis 43 X-axis Y-axis Z-axis Z-axis Y-axis Z-axis (2 TW) 14
44 45 Z1 Z2 Z2 Z1 Z2 Z1=Z2 46 Z2 Z2 Z1=Z2 47 (1TW) 15
16
