Tus neeg siv phau ntawv

20 /37 EN
Refrigerator / User Manual
Operating the product
5.2 Activating water filter
change warning
(For products connected to the mains water
line and equipped with filter)
Water filter change warning is activated as follows:
Automatic filter usage time calculation is not enabled ex factory.
It must be enabled in products equipped with a filter.
The display board we use in the refrigerator has a six-key system.
Set values are shown in the display.
After the product is energized, the set temperatures for both compartments will be shown in the display.
Press the “Alarm Off“ button for 3 seconds to activate the filter counter.
Press the Alarm off button for 3 seconds to
activate the filter counter
*(3second pressing)
Activating filter counter is complete. After 3120 hours (130 days), the filter warning LED lights up and
warns the user.
It must be pressed the Alarm Off button for 3 seconds to turn off this warning.
LED can be turned off by pressing
the button for 3 seconds when
the filter warning LED is activated
Filter warning LED.
Once the filter has been replaced, press the Alarm Off button for 3 seconds. The filter counter is
activated again. 3120 hours are expected to be completed for next warning
Again, press the Alarm Off button
for 3 seconds to activate the
filter counter
NOTE: This function must be triggered and activated manually by the customer. If this function is not
desired to be used again, the second time after the warning LED has been turned off, it must be not
activated the function.
*17
*18
*19*20