To prevent accidents and/or machine damage, read these instructions before installation or use. Use the dryer only as instructed in this owner’s guide and installation instructions manual included with your dryer.
Please read this user manual first! Dear Customer, Thank you for prefering a Blomberg product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well.
TABLE OF CONTENTS 1 Important Safety Instructions 4 5 Operating the product 2 Your Dryer 8 5.1 Control panel...........................................16 5.2 Screen symbols.......................................16 5.3 Preparing the machine.............................17 5.4 Program selection....................................17 5.5 Main programs........................................17 5.6 Extra programs........................................17 5.7 Program selection and consumption table.19 5.
1 Important Safety Instructions WARNING: To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow the basic precautions including the following: A • Read all instructions before using the appliance. Otherwise, there may be the risk of personal injury or material damage. Additionally, any warranty and reliability commitment will become void. A This product has been designed for home use only. • The appliance must be operated at temperatures between +5°C and +35°C.
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded. • Power cord plug must be within easy reach after installation. • To reduce the risk of fire or electric shock, do not use extension cords, multi-plugs or an adapter to connect the dryer to electrical mains.
to the tumble dryer can result if the metal reinforcement come loose during drying. • Before loading check all garments for lighters, coins, metal pieces, needles, etc. • Fabric softeners, or similar products, should be used as specified by the fabric softener’s instructions. The use of fabric softener sheets is not recommended. • The final part of a tumble dryer cycle occurs without heat (the cool-down cycle) to ensure that the items are left at a temperature that ensures the items will not be damaged.
• For power saving in models with lamps, at times when your dryer is not in use, keep the door closed if the On/Off button is pressed (if the dryer is energized).
2 Your Dryer 2.1 Overview 10 1 2 3 9 8 4 5 7 6 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
2.2 Package Contents 1 2 3 4 1. Water drain hose (2951261600) 2. Filter drawer spare sponge (2964840100) 3. User Manual (2960311018) 4.
3 Installation Instructions A WARNING - Risk of fire • • • • The clothes dryer (“appliance‘) installation must be performed by a qualified installer. Install the appliance according to the manufacturer’s instructions and local codes. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the ap pliance manufacturer as suitable for use with clothes dryers.
9. Attach the two remaining power cord outer conductors to the 2 terminals labeled L. Tighten both screws so that the power conductors are securely held in place. 10. Tighten the strain relief so that the power cord cannot be moved. 11. Replace the cover on the junction box and fasten in place. The dryer is now ready to be plugged into the 3-wire receptacle of the proper rating. The receptacle should be located so that the plug and receptacle will be accessible with the dryer in its installed position.
Installation Instructions 24.6 ” (625 mm) min. 90 0 90 0 25 ¾ ” 650 mm min. 3.4 Minimum Installation Clearances Alcove or Built-under Closet Sides 0.59 in. (15 mm) 0.59 in. (15 mm) Top 2.68 in. (68 mm) 2.68 in. (68 mm) Rear 0.59 in. (15 mm) 0.59 in. (15 mm) Front 0.20 in. (5 mm) 0.20 in. (5 mm) 12 / 28 EN 36.14” (918 mm) min. Ventilation Requirements Closet door must have 2 openings, one located 3.2 inches (8 cm) from bottom of door having a minimum area of 16 sq.
3.6 Adjusting the feet • • In order to ensure that the dryer operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Turn the feet to left or right until the dryer stands level and firmly. 2 1 1 3 C Never unscrew the adjustable feet from their housings. 3.7 Destroying packaging material Packaging material can be dangerous to children. Keep the packaging materials out of the reach of children or dispose of them accordingly.
4 Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.
• • Clean the filter drawer regularly either when the Filter Drawer Cleaning warning symbol appears or after every 3 drying cycles. (See 6. Maintenance and cleaning) Ventilate the room, where the dryer is located, well during drying. 4.5 Correct load capacity Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table. C It is not recommended to load the dryer with laundry exceeding the level indicated in the figure.
5 Operating the product 5.1 Control panel 1 2 6 1. 2. 3. 4. 5. 6. 3 5 4 Program selection knob Remaining duration indicator On/Off button Start/pause button End duration button Sound warning button 5.
5.3 Preparing the machine 1. 2. 3. 4. Plug in the machine Place laundry inside the machine. Press the On/Off button. When your machine turns on for the first time, it turns on with the declaration (cotton cabinet dryness) program. C 5.6 Extra programs The following extra programs are available in the machine for special conditions. C C Pressing the On/Off button doesn‘t mean the program starts. Press the Start / Pause button to start the program.
• Bulky • Quick Dry 30 Dry only fibre quilts with machine-dryable label. Load the quilt in the correct way to avoid damages on the machine and the quilt. Take out the quilt cover before loading the quilt in the machine. Fold the quilt in two before loading. - Do not load more than 1 piece of fiber duvet for two persons (200x200 cm). Do not dry items containing cotton such as quilts, pillows and etc. - Do not dry items other than quilts such as carpets, rugs or mats.
5.
5.8 Auxiliary functions Sound warning cancel Drying machine makes sound warnings when the program is completed. If you don’t want sound notifications, press the “Sound Notification” button. When you press the sound notification button it lights up, and program does not make sound notifications when completed. C You can select this function before or after the program starts. C Warning symbols may vary according to the specifications of your machine. 5.
5.11 Starting the program Start the program by pressing the Start / Pause button. Start/Pause led and the Drying led light up, indicating the program started. The “:” sign in the middle of the remaining duration starts to blink. 5.12 Child Lock The machine features a child lock which prevents the machine program flow from being affected when buttons are pressed during operation. When the Child Lock is active, all buttons except for the On/Off button are deactivated.
5.15 Program end When the program ends, the Final/Wrinkle Prevention, Fiber Filter Cleaning and Water Tank Warning leds on the program follow up indicator light up. Loading door can be opened and machine becomes ready for a second run. Press the On/Off button to turn off the machine. C C C 22 / 28 EN In case the laundry is not removed after the program is completed, the wrinkle prevention program that lasts 2 hours start in order to prevent wrinkling of the laundry that remains inside the machine.
6 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. C A C Such fiber and lint are generally formed during wearing and washing. • Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth.
A Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! • Pull out the filter drawer. • Open the filter drawer by pressing the red button. • Take out the filter drawer sponge. • Clean lint, fiber, and cotton raveling on the filter cloth by hand or with a soft piece of cloth. When you notice a layer that may lead clogging on the filter cloth, please clean the layer by washing in warm water.
• Wash the filter drawer sponge by hand to remove the fiber and lint on the surface. After washing the sponge, squeeze it by hand and remove the excess water. Well-dry the sponge before storing it. C • • • Close the kick plate cover. It is not necessary to clean the sponge if lint and fiber accumulation on it is not significant. Place the sponge back into its place. Close the filter drawer as to lock the red button.
7 Troubleshooting Drying process takes too much time. • Pores of the lint filter are clogged. >>> Wash the lint filter with warm water. • Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer. • Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any) that block ventilation in front of the ventilation grids. Ventilation is not sufficient since the room where the machine is installed is very small.
Lint Filter Cleaning symbol is on. • Lint filter is not cleaned. >>> Clean the lint filter. Lint Filter Cleaning symbol is flashing. • Filter housing is clogged with lints. >>> Clean the lint filter housing. • A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water. • Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.