Installation manual

Position the cable extending at the bottom edge
(Figure B).
Remove 2
15
/
16
" - 3
15
/
16
" (75mm-100mm) of the cable's
outer casing, and then remove 3/8"-1/2" (9-13mm) of
insulation from each wire. (Figure C)
WARNING
Dishwasher must be secured to adjacent cabinetry using
the mounting brackets provided. Failure to do this may
cause damage to property or bodily injury.
Place the two mounting brackets into the top corners of the
dishwasher.
Fix the mounting brackets (A) to the top corners of the
dishwasher, with the screws supplied.
Bend sides of mounting brackets (B) in order to fix from
sides (if necessary)
6.2 PREPARATION FOR INSTALLING
MOUNTING BRACKETS
Figure C
6
B
B
A
A
Figure B