Installation manual

Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher

supply line.

Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compression

fitting, or braided hose).

Electrical Supply Cable - Minimum #14AWG, 2 conductors, 1 ground, insulated copper

conductors.

90° elbow with 3/8" N.P.T. male threads on one leg, and sized to fit your water supply

line (copper tubing/compression fitting, or braided hose) on the other leg.

UL listed conduit connector or strain relief.

Teflon tape or other pipe thread compound to seal plumbing connections.

Pipe Wrench

Wire Cutter Drill

Hole Saw

Hammer Wire Stripper

Tape Measure

Torx Screwdriver Phillips Screwdriver

Adjustable Wrench

Scot Screwdriver

Scissors

Level Brush Pencil

Slicone

Glue

2. TOOLS WHICH MAY BE NEEDED

3. MATERIALS WHICH MAY BE NEEDED

(Additional materials may be required to comply with local codes)

(T20)