Installation manual

7
USA
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
Notice :
Make sure the dishwasher is plumb and 
notice dishwasher can be placed with a small
clearance under the counter top.
Turning the screwdriver in the direction of the 
black arrows will bring the dishwasher back feet
up.
Turning the screwdriver in the direction of the 
white arrows will take the dishwasher rear feet
down.
T20
A
B
6.4 INSTALLING THE SIDE TRIM STRIPS
1. Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the side
walls (Figure B).
Notice :
Make sure you use the correct trim strip since 
there is a left and right side strip. The flexible
material should be facing forward (Figure B).