Owner Manual

27
USA
Floor illumination
Illuminates to show program is still
running.
(Select Models)
Your machine reflects a light to the
floor during the washing process. This
light turns off after the washing process
is complete.
C
Floor illumination cannot be
cancelled by the user.
Changing the Download Cycle
You can use the HomeWhiz application
to change the Download Cycle, which
is the last program on the product.
You can check the Table of Program
Data and Average Consumption Values
to see what the downloaded programs
might be and the default Download
Cycle.
To change the Download Cycle:
• Connect to your product on the
HomeWhiz application.
• Turn on the Remote Control
function for the product.
• Go to the settings page of the
product on the HomeWhiz
application.
• On the settings page of the
product, proceed to the Download
Cycle Program page.
• On the Download Cycle Program
page, select a program to
download on your product.
• Select the desired program on the
Download Cycle page, and press
Download Cycle on the HomeWhiz
application.
• While the program is being
downloaded, you will see an
animation on the program and
HomeWhiz application.
• Once the download procedure
is complete, you can select and
install the Download Cycle on
the product or the HomeWhiz
application.
C
You can check the Table of
Program Data and Average
Consumption values to
see the programs you can
download on your product.
C
If you download another
program on the product, your
previous selection will be
cancelled.
C
You can download as many
programs as you wish on
the product, and change the
Download Cycle whenever
you want. You just need to
make sure that your smart
device and product are
connected to the internet
and the Remote Control
function of the product is
turned on.
Interior Lighting
(Select Models)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After switching on your machine,
press the Menu key for 1 second.
2. Press <- and +> to proceed to “L:”
on the display. Select the position
you want with the Selection key.
Interior lighting is off in “L:0”
position and on in “L:1” position.
3. Press the Menu key to exit the
settings menu. Your setting will be
saved automatically.