Dryer User Manual LTK310030W EN 2960313139_EN/201221.
Please read these instructions first before using your appliance Thank you for choosing a Blomberg appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions. Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use.
1 Important instructions for safety and environment C NOTE • This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
1.1.1 Electrical safety B DANGER! • Electrical safety instructions should be followed while electrical connection is made during the installation. • The appliance must not be supplied through an external switching device, such as a timer,or connected to a circuit that is regularly switched on and off by utility. • Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician.
DANGER! Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard. • Unwashed laundry items • Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
• A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent. Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity! A • WARNING! Washing machine cannot be placed on the dryer.
1.4 Child safety • • The development, manufacturing and sales phases of this product is conducted in conformity with the safety rules specified in all related instructions of the European Union. Packaging materials are dangerous for the children. Keep packaging materials away from children. Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do not let them tamper with the dryer.
2 Your Dryer 2.2 Package Contents 2.1 Overview 11 1 2 10 3 1. Water drain hose * 6. Water Filling Container* 2. Filter drawer spare sponge* 7. Pure Water* 3. User Manual 8. Fragrance Capsules Group* 4. Drying basket* 9. Brush* 5. Drying basket user manual* 10. Filter cloth* 9 8 4 5 7 6 1. Top panel 2. Control panel 3. Loading door 4. Kick plate opening button 5. Ventilation grids 6. Adjustable legs 7. In models where the tank is placed below, the water tank is inside the toe board 8.
3 Installation • Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. • C • Preparation of the dryer’s location as well as the electrical and waste water installations is under customer’s responsibility.
C • • • NOTE Water drain hose should be attached to a height of maximum 80 cm. Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine. If there is an accessories pack supplied with your product, please see the detailed description. 3.4 Adjusting the feet Turn the feet to left or right until the dryer stands level and firmly. 3.5 Transportation of the dryer Drain all water that has remained in the dryer.
4 Preparation • 4.1 Laundry suitable for drying in the dryer • Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer. 4.2 Laundry not suitable for drying in the dryer Items with this symbol dried in the dryer. C • Do not dry with dryer should not be • • Delicate embroidered fabrics, woollen, silk garments, delicate and valuable fabrics, airtight items and tulle curtains are not suitable for machine drying.
5 Running the product 5.1 Control Panel 1 8 9 1.On/Off/Program Selection button. 2.Start / Stand-by button. 3.Drum light button. 4.End time selection button. 5.Time program selection button. 7 6 5 4 3 2 6.Low temperature selection button. 7.Audible warning and child lock selection button. 8.Wrinkle prevention selection button. 9. Dryness level selection button. 5.
5.4 Program selection and consumption chart Programmes Programme Description Capacity (kg) Spin speed in washing machine (rpm) Drying Time (minutes) EN Cottons You can dry your heat-resistant cotton textiles with this programme. A drying setting suitable for the thickness of the products to be dried and the desired level of dryness should be selected. 10 1000 180 Cottons Eco It dries single layer, casual cotton textiles in the most economical way.
Daily You can dry both cotton and synthetic laundry with this programme.Sports and fitness clothes may be dried with this program. Shirts 4 1000 83 It dries the shirts in a more sensitive manner, and causes less creasing and easier ironing. 1,5 1200 40 Express Use this program to have 2 shirts ready for ironing. 0,5 1200 15 Hygiene It is a long-term program that you can use for the clothes (baby clothes, towels, underwear, etc. cotton) you require hygeine.
Allergy UK is the trademark of the British Allergy Foundation. The Seal of Approval has been created to guide people requesting an advice that the product significantly reduces the amount of the allergens in an environment where allergic people are present or the product restricts/reduces/ eliminates the allergens. The purpose is to provide evidence that the products have been scientifically tested or analysed to yield measurable results. 5.
Water tank If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. Warning indicator turns off and program resumes. Cleaning of filter drawer/ heat exchanger Warning symbol flashes periodically to remind that filter drawer must be cleaned. 5.7 Starting the program Press the Start/Stand-by button to start the program.
C • • • NOTE! Adding laundry after the drying operation starts may cause the dried laundry inside the drying machine to mix with wet laundry and leave the laundry damp at the end of operation. Adding or removing laundry during drying may be repeated as many times as you wish. But this operation continuously interrupts the drying operation, and thus increases program duration and energy consumption. So, it is recommended to add laundry before the program starts.
6 Maintenance and cleaning A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it. Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.
A • 6.4 For the condenser; WARNING! Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! C • NOTE Clean the condenser after every 30 drying cycles or once a month. 6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.
7 Troubleshooting Drying operation takes too long. Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the fibre filters with warm water and dry. Evaporator front side may be clogged. >>> Clean the front side of the evaporator. The ventilation grills in front of the machine may be closed. >>> Remove any object in front of the ventilation grills that blocks air. Ventilation may be inadequate because the are the machine is installed in is too small.
An audible warning is heard from the machine Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places. Filters of the machine may not have been installed.>>> Install the fibre filters (internal and external) or the environmentally-friendly filter to their housing. Evaporator warning icon is flashing. Evaporator front side may be clogged with fibres. >>> Clean the front side of the evaporator. Fibre filters may not be inserted.
8 Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). 8.1 Attention! When installed, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability.For a permanent connection, a master switch with at least 3mm contact clearance and minimum 13 A rating must be used. 8.
BLOMBERG UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS Your new Blomberg product is guaranteed against faulty materials, defective components or manufacturing defects. The standard guarantee starts from the date of original purchase of the product, and lasts for a period of thirty six (36) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Blomberg offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
BLOMBERG UK AND IRELAND OPTIMA INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS This 10 year guarantee relates to Blomberg products that feature the Optima Inverter Motor. The Optima Motor guarantee terms and conditions are in addition to our Standard guarantee terms and conditions detailed in the previous section. In order to activate the 10 year guarantee you MUST register the appliance within 90 days of the original purchase date. You can register by first visiting blomberguk.
HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation available should the product require attention under guarantee. Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services. When you call us you may be required to input your serial number into your telephone keypad. For help please visit Blomberguk.
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 392/2012 Supplier name or trademark BLOMBERG Model name LTK310030W 7182483260 10.
