Operation Manual

33
EN
3-If there is lint accumulation in the funnel of the
water tank, clean it under running water.
4-Place the water tank into its seat.
For the condenser;
Hot and humid air in the condenser is cooled with
the cold air from the room. Thus, the humid air
circulating in your dryer is condensed and then
pumped into the tank.
C Clean the condenser after every 30 drying
cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out, open
the door of the machine and wait until it cools
down.
2. Unlock the 2 condenser locks after opening the
kick plate.
3. Pull out the condenser.
4. Clean the condenser by applying pressurized
water with a shower armature and wait until
the water drains.
5. Place the condenser in its housing. Fasten the
2 locks and make sure that they are seated
securely.
6. Close the kick plate cover.