Operating instructions

23
4. Clean foreign object trap and the
pump opening. Check if the pump im-
peller (in the pump opening) can be
turned freely.
5. Replace the cap on the drain hose and
put it away.
6. Replace the foreign object trap and
turn it tight (in clockwise direction).
7. Close the service door.
Water inlet strainer
Clean if water flows very slowly, or not at
all.
1. Switch off the machine, turn off the
water tap.
2. Take the inlet hose off.
3. Pull out the strainer in Aquasafe or the
two strainers in Aquasafe+ (depending
on the model) with universal or needle
nosed pliers, clean with a small soft
brush and fit back.
4. Pull out the strainer in the back wall
(except in case of Aquasafe+) with uni-
versal or needle nosed pliers, clean
with a small soft brush and fit back.
5. Put inlet hose back on and tighten
"fingertight".
6. Turn the water tap on full and check
for leaks at the connections.
Decalcifying
It is not necessary to decalcify the machine
if the correct amount of detergent is used.
• When necessary, use only a decalcify-
ing agent suitable for washing ma-
chines. Make sure to follow the in-
structions on the package.