Washing Machine WAF 4100 A WAF 4080 A User's Manual
Contents 1- Technical Features of Your Washing Machine 3 2- Warning 5 3- Preparation 7 4- Program Selection and Starting Machine 11 5- Care and maintenance 15 6- Installation 17 7- Before calling service 19 2
1 Technical Features of Your Washing Machine Maximum dry laundry capacity (kg.) Height (cm.) Width (cm.) Depth (cm.) Net Weight (kg.) Electricity (V/Hz.) Total Current (A) Total Power (W) Washing -rinsing cycle (cyc/min) Spinning cycle (max cyc/min) WA 4100 A WA 4080 A 4.5 4.5 85 60 45 59 230/50 10 2350 85 60 45 59 230/50 10 2350 52 52 1000 800 There may be changes in the technical features without prior notice in order to enhance product quality.
Your Washing Machine 1 2 3 4 5 1 Detergent dispenser 2 Front Panel 3 Front door 4 Kick Plate Cover 5 Height-adjustable feet 4
2 Warning • This product is designed for home use. of water and hygiene compound used. If low quality and unfitting cleaning material is used the stains will be fixed. Before washing your laundry with stain keep your attention on cleaning the laundry as explained in following pages. • Your washing machine is adjusted to 230V. • If the fuse in your house is less than 16A than have a certified electrician deploy an 16A fuse.
• • off. Check your taps. Turn your machine off and on. If the problem persists unplug your machine, turn off tap water and call authorized service. If program is started and program selection can not be performed your machine might be in protection mode due to infrastructure problem (voltage, water pressure, etc.) Press and hold the > Start/ Pause/Cancel < button for 3 seconds in order to switch machine to factory settings.
3 Preparation Before starting your machine please beware of below mentioned points: Opening front door Pull the handle to open the front door. Your machine’s front door is designed for opening during only machine is not operating. If the led displays “door” than door can open. Did you plug the cable? Did you connect draining hose correctly? Did you close front door? Did you open tap water? Loading machine with laundry Fill the machine by unfolding and not squeezing laundry.
a. Compartment I, powder detergent drawer for pre-wash. b. Compartment II, powder detergent drawer for main wash. c. Softener dispenser d. Siphon Fill the softener as indicated (usually <100ml; 1 tea bag) on package. Never fill more than “MAX” level. Excess amount will drain to suction cup and be wasted. You might need to fill softener again. If softener is thickened over time add some water for thinning. Softener may obstruct siphon and block flow.
Control Panel 1 2 3 5 6 1- Program selection knob 2- Time delay selection button 3- Auxiliary function buttons 4- On / Off button 5- Program progress display 6- Spin speed selection knob 9 4
Auxiliary Functions Quick-wash Shortens washing time for lightly soiled fabrics. Rinse plus By using this function your machine will add another rinse process to the three rinse processes that it has already done. This additional rinse will reduce any affects on sensitive skin by washing leftover detergent. Anti-creasing To avoid wrinkling of your clothes, select this function.
4 Program Selection and Starting Machine Plug you machine to outlet. Turn on the machine by pressing “On / Off” key. Open the door by pulling the handle and load the machine without exceeding loading capacity and close the door. Specify the appropriate program by looking at program selection table according to type of laundry, degree of soiledness and washing temperature. Position program selection key to desired washing programtemperature. Select convenient spin speed related to selected program.
Energy Consumption (kWh) 55 2.00 4.5 150 50 1.60 4.5 135 49 0.85 4.5 125 45 0.60 4.5 160 50 1.00 4.5 170 60 1.00 2.5 125 45 0.95 2.5 115 40 0.90 2.5 105 40 0.50 2.5 90 40 0.25 2.5 95 40 0.50 2 70 45 0.35 2 65 45 0.25 1.5 55 40 0.25 1.5 45 40 0.03 1 40 30 0.15 2.5 30 40 0.20 Rinse Program 4.5 23 11 0.04 Spin Program 4.5 11 _ 0.
Pressing “On/Off” By pressing “On/Off” button you can make your machine ready for selecting program. When “On/Off” key is pressed “door” led will light on meaning “door can open”. Press “On/Off” key again for turning your machine off. Function Selection Pressing “On/Off” does not mean program started operation. You must press “Start/Pause/Cancel” for starting the program. Additional functions selectable according to selected program can be selected by pressing related key.
Changing Program can be started with delay. During delay period door can be opened or laundry can be added After time delay is initiated by pressing “Start/Pause/Cancel” you can switch machine to “Pause” mode and change delay time. You can use this feature for washing laundry in the same textile group for washing at lower or higher temperatures. For example, instead of Cotton60, Cotton40 can be used.
Emptying Laundry gram can be selected. Even program selection button is changed during the program initially selected program will be executed. For changing washing program “Canceling a program” must be performed afterwards new program can be selected and started After machine starts operation even if spin speed or washing temperature is changed, initial speed and temperature is valid. In order to change spin speed or temperature after pressing “Start/Pause/Cancel” new cycle or temperature can be selected.
5 Care and maintanence Detergent Dispenser Powder detergent residue may accumulate in drawer after a while. In order to clean detergent drawer press the marked point of the siphon on softener compartment and push the drawer towards yourself. Wash the drawer with water region, if your machine is placed in a cold place remaining water in hoses must be drained with pump filter when machine is not used. Water inlet hoses can be drained by taking it out from tap.
finished turn in clockwise direction and close. Close the filter tap by pushing. 6 Caution! If the filter and hose tap does not fit, it leaks water. Installation 2. Leveling the feet If your system is not ready, let a certified plumber make it ready. In order to operate your machine without noise and vibration it must be properly on balance. Four feet of your machine can be adjusted. First loosen the plastic counter bolt. Tighten the counter bolt after adjusting the feet for leveling your machine. 1.
water inlet models, 2 for single water inlet models) on hose or plastic bag for eliminating any leakage in connections points. These seals must be used on each side of the connection. Seals on machine side must be connected filter cannal. 40 and 100 cm. from the ground. Water drain hose could be placed directly to the drain water inlet. 4.
7 Before calling service Water coming from beneath the machine. Check the water intake and drain hoses. Tighten the connections. The washers of the hoses may be worn out. If non of the both, the pump filter is not closed properly. You turned the machine on, but the leds are off on the panel. Check the grounding on the power cable or a blown fuse. Check the front door proper closure. Machine does not take water. Check the front door for proper closure.
