User's Manual

P a g i n a | 3
MANUAL | yooBee Keyfob Tracker yB-010030-KT
1. General information
yooBee Keyfob Trackers are used to track the position of people and assets with an accuracy
of up to 1-2 meter. The yooBee Keyfob Tracker is a small, lightweight and water resistant device
that can be clipped on a shirt or worn on a lanyard. It can also be attached to assets as a sticker
or key chain. It is powered with a replaceable coin cell battery that offers approximately two
years lifetime with a position update once per second, assuming 8 hours of activity per day.
The yooBee KeyFob Tracker features:
• NFC for identification or access control purposes
• Multicolor LED for troubleshooting
• Inertial sensors: Accelerometer, magnetometer
yooBee Trackers are remotely managed through the cloud console for configuration, over-the-
air updates, battery status monitoring and event logging.
2. Getting started
yooBee Trackers are by default in “Transport mode”, which is a deep sleep mode to preserve
battery life time during shipping. Before using the tracker, the device must be switched ON via
NFC by means of the yooBee Toolbox smartphone app.
To switch on the device, tap the “SWITCH ON” button and hold the device close the NFC
antenna of your smartphone.
The yooBee Toolbox app can be downloaded from the “Admin” section on the Cloud Console.
Log into the Cloud Console from your smartphone, click on the “Admin” tab and select the