Owner`s manual
WARRANTY POLICY
All electrical products manufactured by
Wells/Bloomfleld
are warranted against defects
in material and workmanship by our authorized service agents with:
o One
(1)
year replacement part warranty
0
One (1) year. on labor
0
All genuine.
Wells/Bloomfield
replacement parts are warranted for ninety
(90)
days
from date of purchase on non-warranty equipment.
This parts warranty is limited
only to replacements of the defective part.
Any use of non-genuine Bloomfield
parts completely voids any warranty.
Labor includes cost of service invoice and is limited travel time to a sixty (60) mile
radius (or up to a maximum of one hour) to the nearest authorized service agency
or one of it’s sub-service agencies. This service
will
be provided on the customers
premises for non-portable models. Portable models (a device with a cord and plug)
must be taken or shipped to the closest authorized service agency; transportation
charges prepaid. All labor shall be performed during regular working hours.
Overtime
premium
will
be charged to the buyer.
In addition to this warranty policy are the following exceptions:
A.
Dispensers (i.e., tea and coffee) carry ninety (90) day parts replacement only.
Warranty does not include any coverage for:
0
0
Installation, labor, and job check-outs are not considered warranty.
Resetting the safety thermostats, circuit breakers, overload protectors, or fuse
replacements unless warranted conditions are caused.
All problems due to operation at voltage other than specified on equipment
nameplates
-
conversion to correct voltage must be the customer’s responsibility.
All problems due to electrical connections not made in accordance with electrical
code requirements and wiring diagrams supplied with the equipment.
All problems due to inadequate water supply, such as fluctuating, high or low
water pressure, etc.
All problems due to mineral/calcium deposits, or contamination from chlorides
and or chlorines.
De-liming is considered a preventative maintenance function
and not covered by warranty.
Calibration of thermostat.
Replacement of items subject to normal wear to Include
such items as knobs, baskets, grids, mechanical timers, and thermocouples.
Normal
maintenance functions including lubrication, adjustment of thermostats, microswitches,
replacement of fuses, and Indicating lights.
4