WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 telephone: 775-689-5703 fax: 775-689-5976 www.wellsbloomfield.
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only.
TABLE OF CONTENTS WARRANTY ................................................................ SPECIFICATIONS ....................................................... FEATURES & OPERATING CONTROLS ................... PRECAUTIONS & GENERAL INFORMATION ........... AGENCY LISTING INFORMATION ............................ INSTALLATION ........................................................... OPERATION ................................................................ CLEANING INSTRUCTIONS ...........................
FEATURES & OPERATING CONTROLS 2 508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center Fig.
FEATURES & OPERATING CONTROLS (continued) VENTILATOR SECTION ITEM DESCRIPTION COMMENT 1. NAMEPLATE Gives manufacturer, make and model description. Also lists voltage and amperage data. 5. APPLIANCE LIGHT ON when hood power switch is ON. Illuminates cooktop. FIRE SUPPRESSION AGENT TANK (1.5 gal.) Container for Ansulex™ Low-pH liquid fire suppression liquid. 8. ADJUSTABLE (FRONT) LEG Allows the unit to be leveled. 9.
FEATURES & OPERATING CONTROLS (continued) Fig. 2 Ventilator Section Controls & Indicator Lights GRIDDLE SECTION G.04 H.04 G.05 H.05 G.06 G.02 COOKTOP CONTROLS G.01 H.06 G.03 HOTPLATE SECTION H.02 HUMITROL RACK H.03 DRAWER INSERT PAN RW-STYLE W.03 W.05 W.06 W.02 W.04 W.01 OPTIONAL DRAWER WARMER SECTION RWT-STYLE W.08 W.06 W.09 W.07 Fig. 3 Griddle, Hotplate and Drawer Warmer Sections 4 508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center H.
FEATURES & OPERATING CONTROLS (continued) DESCRIPTION ITEM COMMENT VENTILATOR SECTION CONTROLS * V.01 POWER SWITCH Energizes BLOWER MOTOR. If, after 10 seconds, proper conditions are met, cooking appliances are energized. APPLIANCE LIGHT is ON when POWER SWITCH is ON. V.02 POWER ON INDICATOR GREEN. Glows when POWER switch is ON. V.03 CHECK FILTERS ALARM INDICATOR AMBER. Glows if one or more filters are out of position. Check all filters and baffles for proper installation. V.
PRECAUTIONS AND GENERAL INFORMATION DANGER FIRE HAZARD NOTE: Fire suppression system and all associated components must only be serviced by an authorized Ansul® Distributor. All setup, charging, repair and/or adjustment of the fire suppression system must be performed by an Authorized Ansul® Distributor ONLY. IMPORTANT: If a remote pull station is installed, both rear casters (9) must be replaced with legs to deter moving the unit.
PRECAUTIONS AND GENERAL INFORMATION (continued) This appliance is intended for use in commercial establishments only. This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents. Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.
PRECAUTIONS AND GENERAL INFORMATION (continued) OPERATIONAL NOTES: REPLACE PREFILTER and REPLACE FILTER PACK indicator lights provide a timely warning that a system shut-down is imminent. The actual time between the indicator light coming on and the loss of cooking appliance power will depend upon the cooking conditions. Anytime a dirty PRE-FILTER is replaced, the system airflow will increase. If the condition of the FILTER PACK is marginal, the REPLACE FILTER PACK light could then come on.
INSTALLATION UNPACKING & INSPECTION Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the Appliance before connecting electrical power or otherwise performing any installation procedure. Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.
INSTALLATION (continued) IMPORTANT! Verify that this VENTILATOR and food cooking equipment installation is in compliance with the specifications listed in this manual, with local code requirements, and in accordance with N.F.P.A 96 (THE STANDARD FOR VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS current edition).
INSTALLATION (continued) FIRE SUPPRESSION SYSTEM INSTALLATION 1. Any REMOTE MANUAL PULL STATION must be installed by an authorized ANSUL® distributor in accordance with the AUTHORITY HAVING JURISDICTION. DANGER FIRE HAZARD NOTE: If a REMOTE MANUAL PULL STATION is installed, moving the unit for servicing will cause the Ansul® system to discharge. In this case, the unit must only be installed with four fixed legs (i.e. remove rear casters and replace with legs).
INSTALLATION (continued) FILTERS INSTALLATION NOTE: The GREASE BAFFLE and FILTER PACK activate mechanical switches, and the PRE-FILTER activates a vacuum switch, to verify that the filter elements are in their proper positions. All filter elements must be properly installed or the cooking appliances will not be energized. Also, the CHECK FILTERS indicator will light. 1. FILTER PACK: Ships installed in the hood. If the FILTER PACK is not in position, the CHECK FILTERS indicator will light.
INSTALLATION (continued) CAUTION: GREASE DRIP TRAY INSTALLATION 1. Install the GREASE DRIP TRAY on the hanger brackets, directly below the grease baffle. ROLL WARMER DRAWER INSTALLATION BURN HAZARD DO NOT OPERATE UNLESS THE GREASE DRIP TRAY IS INSTALLED. 1. Be sure roller catches (inside warmer cavity) are in the open position. Install drawer assemblies in drawer slides. 2. Place appropriate one drawer insert pan into each warmer drawer. If used, place one Humitrol rack into each drawer pan.
OPERATION CAUTION: HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns. VENTILATOR OPERATION 1. Press the VENTILATOR POWER switch to ON. The green VENTILATOR POWER light will glow and the blower fan will start. After a short time, if all filters are sensed as being in position and not clogged, the cooking appliance will be energized. During normal operation, the VENTILATOR POWER light will be the only light glowing on the upper control panel. 2.
OPERATION (continued) GRIDDLE OPERATION CAUTION: HOT SURFACE PREPARING THE GRIDDLE SURFACE 1. SEASONING STANDARD GRIDDLES As manufactured, the steel surface of your Wells griddle has microscopic pores. It is important to fill these pores with oil in order to provide a hard, non-stick cooking surface. a. Preheat the griddle surface to 375ºF (191ºC). b. Spread a light film of cooking oil over the entire griddle surface c. Allow the oil film to cook in for approximately 2 minutes, or until it smokes. d.
OPERATION (continued) CAUTION: DRAWER WARMER OPERATION (when provided) HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns. Indicator Light Temperature Control (Infinite Switch) Fig. 9 Roll Warmer Temperature Control 1. Moist heat with Humitrol Rack: a. MOIST operation prevents food from drying out as moisture, as well as heat, is applied to the warming chamber. b.
OPERATION (continued) DRAWER WARMER OPERATION (when provided) 1 2 3 ºF ºC ITEM 1 PROCESS Key: Press to view actual temperature of cavity. 2 4 Character LED Display: Normally shows SETPOINT temperature. 3 ºF or ºC Indicator: Glows to indicate if unit is configured for degrees Fahrenheit or degrees Celsius. 4 LOAD Indicator: Glows when heating element is energized.
CLEANING INSTRUCTIONS CAUTION: ELECTRIC SHOCK HAZARD Disconnect appliance from electric power before cleaning. CAUTION: HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns. Allow appliance to cool before cleaning. IMPORTANT: Never allow PRE-FILTER or FILTER PACK to get wet. DO NOT wash either of these two filters. Washing these filters will ruin them and cause the appliance to shut-down.
CLEANING INSTRUCTIONS (continued) HOTPLATE SECTION CAUTION: ELECTRIC SHOCK HAZARD PREPARATION Disconnect appliance from electric power Allow to cool before cleaning Disconnect appliance from electric power before cleaning. FREQUENCY Daily TOOLS Warm water and a mild detergent Soft clean cloth or sponge Plastic scouring pad, plastic scraper CAUTION: Hot Surface Exposed surfaces can be hot to the touch and may cause burns. Allow appliance to cool before cleaning.
CLEANING INSTRUCTIONS (continued) CAUTION: HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns. CAUTION: ELECTRICAL SHOCK HAZARD DO NOT splash or pour water onto control panel or wiring. CAUTION: HEAT AND SMOKE HAZARD Keep the ventilator fan running during any "hot surface" cleaning operation to avoid a build-up of heat and/ or smoke. PRECAUTIONS Griddle surfaces are HOT.
CLEANING INSTRUCTIONS (continued) DRAWER WARMER CLEANING INSTRUCTIONS CAUTION: PRECAUTIONS: ELECTRIC SHOCK HAZARD Turn control knob to OFF. Allow drawers to cool before proceeding. Remove drawer pans and Humitrol racks. FREQUENCY: Minimum -Daily TOOLS: Warm water and mild detergent Clean cloth or sponge Disconnect appliance from electric power before cleaning. CAUTION: HOT SURFACE 508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center 1. Remove drawers from warmer: a.
MAINTENANCE INSTRUCTIONS CAUTION: ADJUSTMENTS AND LUBRICATION SHOCK HAZARD PRECAUTIONS: Turn control knob to OFF. Unplug warmer Allow drawers to cool before proceeding. Remove drawer pans and Humitrol racks FREQUENCY: Minimum - monthly. Every 2 weeks recommended. TOOLS: Screwdrivers, Phillips (+) and flat blade (-). Nut drivers, 3/8” and 7/16”. Food-grade lubricant. Disconnect appliance from electric power before cleaning.
TROUBLESHOOTING SUGGESTIONS SYMPTOM POSSIBLE CAUSE RECOMMENDED REMEDY No power to unit Not plugged in or circuit breaker tripped Plug unit into power receptacle Reset circuit breaker Cooking appliances not energized Filters not properly installed (CHECK FILTERS lit) Install filters properly Filters expended (SERVICE REQUIRED lit) Replace filters Ansul® system discharged or not cocked. (Buzzer sounds) Contact Ansul® Distributor for service.
MAINTENANCE SCHEDULES USE AND MAINTENANCE SHALL BE IN ACCORDANCE WITH THE STANDARD FOR VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS, N.F.P.A 17A & N.F.P.A. 96 (current editions). 1. 6-MONTH MAINTENANCE (MUST BE PERFORMED BY AN AUTHORIZED ANSUL® DISTRIBUTOR ONLY): a. Inspect and test total operation including FIRE DAMPER and all SAFETY INTERLOCKS. b.
25 508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center WELLS BLOOMFIELD, LLC
26 508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center Max interval: 12 months Replace fire damper fusible link: rated @ 280ºF Replace fire suppression links in hood plenum: each link is rated @ 212ºF Replace two (2) fire suppression links at cooking appliance: each link is rated @ 212ºF WELLS BLOOMFIELD, LLC
ANSUL® MATERIAL SAFETY DATA SHEET ANSUL INCORPORATED MARINETTE, WI 54143-2542 ANSULEX Low pH QUICK IDENTIFIER (In Plant Common Name) Manufacturer’s Name: ANSUL INCORPORATED Emergency Telephone No.
ANSULEX Low pH (continued) SECTION 5 - HEALTH HAZARDS Threshold Limit Value: None Established Routes of Entry: Eye Contact: Irritant Skin Contact: Irritant Inhalation: Not an expected route of entry. Can be irritating to mucous membranes. Ingestion: Irritating to mucous membranes. Acute Oral LD50 (Sprague-Dawley rats) 825.5mg/kg. Acute Exposure: Material irritates skin, eyes, and mucous membranes. Chronic Exposure: None known.
PARTS & SERVICE 508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center DESCRIPTION SERVICE PART NO.
Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 telephone: 775-689-5703 fax: 775-689-5976 www.wellsbloomfield.