Use and Care Manual

BULB PLANTING INSTRUCTIONS
Step 1: Loosen soil in the planting bed to a depth of at least 8 Remove any weeds, rocks or
other debris. You can mix in compost, other organic matter or slow releasing
fertilizer if your soil lacks nutrients.
Step 2: Depending on the bulb, follow the recommendation on the label for planting depth.
As a general rule, plant big bulbs about 8” deep and small bulbs about 5” deep or
plant the bulb three times the height of the bulb, for example if your bulb is 3 inches
you would plant it at 6” deep). Set the bulb in the hole pointy side up or the roots
down. It’s easy to spot the pointy end of a tulip; tougher with a crocus. If you can’t
figure out the top from the bottom, plant the bulb on its side, in most cases, even if
you don’t get it right, the flower bulb will still find its way topside.
Step 3: Now that the bulbs are planted, back fill with soil over the hole, lightly compress the
soil but do not pack it. Water to stimulate root growth. There is no need to water
continuously unless you live in an area with low precipitation in the winter months.
AFTERCARE
Fertilizing
For bulbs that are intended to naturalize (return for several years) or for bulbs that are com-
ing into their second year, spread an organic fertilizer such as compost, or a slow release
bulb food on top of the soil.
Pruning
When the flowers have completed blooming, cut the flower head o but do not cut the
foliage. Bulbs will use the foliage to gather nutrients from the sun and store for the following
seasons. Once the foliage has turned yellow or brown you can cut them to ground level.
FOR MORE QUESTIONS OR ASSISTANCE VISIT BLOOMSZ.COM/LEARN

Summary of content (1 pages)