Installation & Assembly

ManualsBrandsBlossom ManualsBlack Kitchen FaucetsPull Down Single Handle Kitchen Faucet

www.BlossomUS.com

Important

Maintenance

• We recommend that this product is installed by a qualiﬁed professional

plumber / contractor.

• Please check this product immediately to ensure that it has not been

damaged and is complete. Before installation, please make sure this

product is the correct model and you have all the parts required for

installation and using.

• Please ﬂush the water system to ensure that no metal swarf, solder, and

other impurities can enter the taps.

•

Turn off water supply before commencing work, this should be done at

the isolating valves of inlet feeds if ﬁtted or main sto

pcock.

• Please read these instructions carefully and keep it for future reference.

Your new faucet is designed for years of trouble-free performance.

Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive

cleaners, steel wool and harsh chemicals as these will scratch, dull, and/or

damage the finish and void the warranty.

1. Shut off water supply. Remove

the old faucet and flexible

hoses. Clean sink surface with a

non abrasive cleaner in prepara-

tion for the new faucet.

2. Connect the flexible hose to

the faucet body.

3. Position the faucet in the

countertop hole, from beneath

the countertop hole assemble

the rubber washer, metal

washer, female screw in order.

Tighten the head screw until

faucet is secure.

4. (If not done already) attach

sprayer to female connection of

sprayer hose by hand and

tighten until secure. Make sure

the black washer is seated and

installed properly.

5. Attach the female connec-

tions of the flexible hoses to the

hot and cold water supply.

6. After installation is complete,

turn on the water supply and

allow both hot and cold water

to run separately for at least two

minute each. While water is

running, check for leaks. It is

important to view the connec-

tions at the male and female

flexible hose connections. If leaks

are detected, refer back to the

instructions and adjust accord-

ingly.

Faucet Installation Procedure

Sprayer

Safety Tips

If you use soldering for the installation of the faucet, the seats, cartridges and

washers will have to be removed before using flame. Damage caused by

improper soldering will void the warranty.

Protect your eyes with safety glasses when cutting or soldering water supply

lines.

Faucet body

O-ring

Rubber washer

Metal washer

Female screw

Head screw

Flexible hoses

Recommended Tools

Adjustable wrench S2.5 Allen key Teflon TapeScrew driver