Modu-licious Bedside Table DESIGNED IN 1999 ASSEMBLY NOTES | REV 00 K E E P T H E ST U F F YO U L I K E A N D STO R E I T W E LL . NEED A HAND? Drawers and doors are your canvas with the award-winning Modu-licious series. Contact us at service@bludot.com or 844.425.8368 for assistance.
Parts & Hardware QTY 2 QTY Foot QTY QTY Shelf Panel 1 | 8 4 4 . 4 2 5 .
Parts & Hardware QTY 18 QTY Pt. 5001 QTY A S S E M B LY Pt. 1023 18 Pt. 5002 N O T E S 4 QTY QTY 4 Pt. 4005 QTY 1 Pt. 8018 22 Pt. 5005 S E R V I C E@ B L U D O T.
How to use the cam lock system 1 3 Note direction of cam arrow. 3 | 8 4 4 . 4 2 5 . 8 3 6 8 2 4 Turn cam clockwise 1/2 turn or until tight. 5 Note direction of cam arrow.
Step 01 ASSEMBLE BASE. Using the stretcher and feet assemble the base as shown. Refer to Page 3 on how to use the cam lock system. Finished Edge PT. 5001 x 2 A S S E M B LY N O T E S PT. 5002 x 2 PT. 4005 x 4 S E R V I C E@ B L U D O T.
Step 02 AT TA C H B O T T O M PA N E L . Attach the bottom panel to the base using the provided hardware as shown. Refer to page 3 on how to use the cam lock system. Bottom Panel PT. 5 0 0 1 X 4 5 | 8 4 4 . 4 2 5 . 8 3 6 8 PT.
Step 03 AT TA C H D R A W E R S L I D E S . Attach drawer slides to side panel as shown using the provided hardware. Repeat for left side panel. Right Side Panel PT. 1023 X 4 A S S E M B LY N O T E S S E R V I C E@ B L U D O T.
Step 04 BEGIN ASSEMBLING CASE . Attach side panels to shelf panel as shown using the provided hardware. Be sure to align grooves on side panels. Refer to page 3 on how to use the cam lock system. Side Panel Shelf Panel PT. 5 0 0 5 X 6 7 | 8 4 4 . 4 2 5 .
Step 05 AT TA C H B A S E . Attach the base as shown using the provided hardware. Refer to page 3 on how to use the cam lock system. PT. 5001 x 6 A S S E M B LY N O T E S PT. 5002 x 6 PT. 5005 x 8 S E R V I C E@ B L U D O T.
Step 06 I N S E R T T H E B A C K PA N E L . Add rubber grommet to back panel as shown. Insert back panel into grooves in case. PT. 8 0 1 8 X 1 9 | 8 4 4 . 4 2 5 .
Step 07 FINISH ASSEMBLING CASE . Finish assembling the case by attaching the top panel as shown using the provided hardware. Refer to page 3 on how to use the cam lock system. To install the drawer extend drawer slides out from case, align with drawer slides as shown, and slide drawer in. Be sure to push until drawer is completely closed and engaged. A S S E M B LY N O T E S PT. 5001 x 6 PT. 5002 x 6 PT. 5005 x 8 S E R V I C E@ B L U D O T.
Additional Information TO RE M OV E D RAWE RS Pull lever up on the right side and push down on the left side of the drawer slide. With levers engaged pull drawer out. TO A D J U ST D RAWE R FRONTS Loosen the acorn nuts, adjust drawer front, re-tighten acorn nuts. CLEAN Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulate for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.