Dash 5.
Table of Contents Safety Information .............................................. 3 Appearance and Key Function ........................... 4 Introduction ........................................................ 5 Call Functions .................................................... 6 Contacts............................................................. 7 Messaging ......................................................... 9 Internet Browser...............................................
Safety Information Please carefully read the terms below: Use Safely Do not use your mobile phone where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospitals Please follow limitations. Please turn off your mobile phone when near medical instruments. Airports Please follow all flight safety regulations and do not use your phone during flight.
Appearance and Key Function Front Camera Power Volume Home Menu Back 4
Rear Camera Flash Speaker Introduction Installation of the SIM Card Note: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please be cautious when carrying, installing or taking out the SIM card. Please contact your cellular phone service provider directly to obtain the SIM card. To insert SIM card: 1. Remove the rear cover and battery. Insert the SIM card. 2. Insert the SD card.
Memory Card SIM Slot 3. Insert the battery and replace the rear cover of the mobile phone. Power On and Off On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch on the phone on. Off - In standby mode, long press on Power key until an options menu appears. Select Power Off in the menu and confirm in the pop-up prompt to switch off the phone. Security You may set a security lock feature as a security measure for the phone.
Call Logs Every telephone number called and received will be saved in the phones call log. All numbers in the call log can be dialed directly by clicking the contact icon on the left side of the screen. When the number appears on the list, click it to view details. Proximity Sensor The proximity sensor determines how far away an object is from the device.
Add Contact Search Click the Search icon to enter the contact search interface. Any numbers or letters associated with any of the contacts saved in the list will be shown in the search results. If there were no matches for the inputted contact, the interface will display no contacts found. Add New Contact 1. Click (+) icon to add contact. 2. Select to save contacts to phone or SIM card. 3. You may edit contact picture, name, telephone number, group, address, and email among other options. 4.
Messaging You may use this function to exchange text messages and multimedia messages with your family and friends. The messages to and from the same contact or phone number will be saved into a single conversation so you may see the entire message history conveniently. Send an SMS Application Menu » Messaging » New message (or use shortcut icon) 1. Click to enter recipient (You may enter contacts from contact book or enter a new number) 2. Compose Message 3.
Attachment Type for MMS Message Internet Browser Menu Functions Backward • After browsing through multiple pages, this option will return the user to the previous page. Forward • After browsing through multiple pages, this option will move to a web page after the current page. Windows • You may view all windows open by clicking the windows icon in the upper right part of the browser. Bookmarks • Click the save to Bookmarks option to make the current URL as a saved Bookmark.
Save for offline reading: Saves page for offline reading. Bookmarks/History: Show your browsing history and view the most visited pages. Settings: Contains a variety of browser settings. Bluetooth & Wi-Fi Bluetooth is a short-range wireless communications technology that devices can use to exchange information and connect to different types of devices which include headsets, car kits, and other devices. Power on Bluetooth 1) Settings » Bluetooth and select to power on Bluetooth.
List of available devices Power on Wi-Fi 1) Settings » Wi-Fi and select ON to power on Wi-Fi 2) Click on the desired Wi-Fi network to be connected. Note: Unsecured networks can be connected to directly - secured networks require a password or credentials prior to connection.
Camera Camera Prior to use: Install memory card before using the camera or video camera. All photos or videos taken by the phone are typically stored in the memory card for large storage capacity for images. Open Camera 1. Applications Menu » Camera 2. Switch to video mode if you want to record videos. Note: You may place a camera shortcut icon on any of the screens Take Pictures 1. Aim the object that the picture will be taken. 2. Press the “Shutter” button on the screen. 3.
Gallery Open Images Applications Menu » Gallery Pictures and videos are stored in separate albums Share Pictures You may share pictures by sending them through Gmail or the E-mail application. You may also send pictures through the MMS message function by composing a message and attaching the picture. Any image can also be sent via the Bluetooth function by selecting Bluetooth equipment that has been paired.
View Images In the picture interface, click on an album to view images In the photo album, scroll the picture towards left to view the next picture or towards right to view the previous one. Crop Pictures If you want to adjust the size of the picture, use the crop tools. Once the arrow appears, pinch your fingers in or out to adjust the size. If you want to adjust the image and keep its proportion, please hold down any of the four corners of the image and adjust accordingly.
Sound Recorder The Sound Recorder can record voice or any audio. You may send any recorded audio via Bluetooth or MMS and also have the option to make any recorded audio the phones default ring tone. Notice: The recorder uses AMR, 3GPP and OGG format. Record - Keep the phone’s microphone near the voice source. - Click the record button to record the audio. - Click the stop button to stop recording the audio. All recordings will be saved in my recording folder in the default music program.
Alarm Clock 1. Click on the Clock icon in the application menu 2. Click set alarm button and enter the alarm clock set interface where you may add and edit alarms Click to add, edit or delete alarms FM Radio FM Radio Through this function, you may listen to FM radio on the device. The FM radio uses the wired headphones as an antenna in order to receive signal. Before using this function, connect the original equipment headphones that came with the phone.
Radio Options Add Favorite Radio Stations Scan FM Radio as Background Click on the Home key to move the FM Radio to the background. Play Store Google Play allows you to download music, movies, and even games. Click the Play icon to sign in with your Google account.
Settings Call Settings Fixed Dialing Numbers and TTY mode Wi-Fi Settings » Wi-Fi to power on. When on, the Wi-Fi will automatically search for available networks. Any unsecured network can be used directly and any secured network requires a password or credentials prior to connection. Bluetooth Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically scan for any nearby open equipment.
Battery General power usage Apps Manage applications - Manage and delete installed applications. Running services - Press the ‘Stop’ button to stop any of the services listed and removes from the "running services" list. Location Access Use wireless - Use wireless services to find locations in applications. When using the GPS satellite positioning, set accuracy to street level (Cancel it to save battery).
SIM card will be permanently locked. Please see your service provider for a new SIM card. Password visible – Make the password visible when it’s typed. Use security credentials - Allow applications to visit security credentials or other credentials. Language and Input Language – Change the language of the phone. Custom Dictionary - Add or delete words to the custom dictionary.
Developer Options If the phone does not display Developer options press “Build number” seven (7) times in the about phone tab in settings. The developer options gives access to USB Debugging and other developer options About Phone Phone information status and firmware updates Storage Connect the phone with the USB cable provided. Once connected, a connection interface will appear.
FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm.
While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level.
