Content 1 2 3 General Information ................................................................................................................................................. 4 1.1 Profile.............................................................................................................................................................. 4 1.2 Safety Information .................................................................................................................................
4 5 Input method ........................................................................................................................................................... 16 4.1 Icons for Input Methods ................................................................................................................................ 16 4.2 To Shift Entry Methods ................................................................................................................................. 16 4.
6 Appendix ..................................................................................................................................................................
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight. SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas.
Use only in a normal and proper manner. EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service.
2 2.1 Phone overview 2.2 Functions of Keys Your phone The mobile phone provides the following keys: Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records.
Delete key Press it to delete a character before cursor. Linefeed In edit interface, you can press this key to switch to another line. Space key Press it in the edit interface to get a blank. Sym key Press it in the edit interface to input a symbol. Shift key In edit interface, you can press it to switch between input methods; Alt key In edit interface, press it to input an alternative symbol or number.
Continuous conversation duration: (Relates to network status) Please refer to their labels for other data related to the battery and the charger. 3 3.1 Getting started Installing the SIM Cards and the Battery An SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data.
pushed in. With the metallic contacts of the battery facing the metallic contacts in the battery slot, press the battery down until it locks into place. Using code The mobile phone and the SIM cards support sorts of passwords, in order to prevent the phone and the SIM cards from being misused. When you are prompted to input any of the codes mentioned below, just input the correct code and then press the OK key.
Note: The SIM card will be locked if you input wrong PIN code for three times. To unlock the SIM card, you need to input the PUK. In general, the PUK can be obtained from the network operator. PUK The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card.
3.3 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked. For this type of machine, some of them have dual battery function. A new battery will have maximum performance after the first three full charge/discharge cycles. Battery level indication: Your mobile phone can monitor and display the battery state.
Note: Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in the right direction. Inserting them in a wrong direction may cause charging failure or other problems. Before the charging, ensure that the standard voltage and frequency of the local mains supply match the rated voltage and power of the travel charger.
battery is properly charged, purchase a standard battery from the OEM or use a battery approved by our company. Using any poor-quality fittings will cause harm to your mobile phone or even incur danger! Note: To guarantee your personal safety and protect the environment, do not litter the battery! Return the old battery to the mobile phone manufacturer or place it in specified battery reclamation areas. Do not litter any battery with other rubbish.
you can dial or receive a call. 3.6 Dialing Calls In the standby interface, press number keys to input the area code and the telephone number, and then press the Dial key to dial a call. To end the call, press the End key. Answering incoming calls Press the Dial key or the Left soft key to answer an incoming call. Press the End key to end the current conversation. To reject an incoming call, press the End key or the Right soft key.
4 Input method This mobile phone provides multiple input methods, including English input in both upper and lower case, and numeric input method. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.
4.4 Inserting a Symbol Press the sym key to enter the Select symbol interface and select a symbol you want. 5 5.1 Using the Menus Phonebook The mobile phone can store up to 500 telephone numbers. The number of telephone numbers that an SIM card can store depends on the storage capacity of the SIM card. After selecting a telephone number in the phonebook, select Options to perform the following operations: View: View the content of the telephone number.
5.2 mobile phone. Send business card: Select and send contacts information to other recipients via text message or multimedia message. Add to blacklist: Add the selected number to blacklist. Mark several: Mark several phone numbers at a time so you can perform a same operation on them. Caller groups: You can assign contacts to the five default caller groups. For each group, you can edit group name, set caller alert, call ringtone and caller picture.
Delete call logs You can delete the latest call records. Choose Delete call logs and then select to delete all the numbers in the call history, or delete only the numbers in the missed calls list, the dialed calls list or the received calls list. Call Timers Choose call timers to view the last call time, the total time of all dialed calls and the total time of all received calls, and/or to reset all the time. Text msg. counter Choose text msg.
5.4 Multimedia Camera Use this function to capture pictures.
key to access Options; right soft key to exit capture interface. Video player Use this function to play video files. By pressing the direction key can you control the playing process of video player: play/pause(OK key), fast forward (press right direction key) and rewind (press left direction key). In video player interface, you can press I/- or O/+ key to tune volume,press * key to switch to full screen play. Audio Player Use this function to play audio files.
I/- or O/+ key to tune volume. 5.5 Messaging If the short message memory is full, a blinking message icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. If the destination user has received the short message you sent and the short message delivery report function is activated, the phone will give off a message report alert tone. Write message Access this menu to create a text message or a multimedia message.
Delete messages You can delete messages stored in Inbox, Outbox, Drafts, etc through this function. Broadcast Message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator. Receive mode: Set it to On to enable or Off to disable cell broadcast service.
Tasks This function enables you to create new memos, which you can view, add, edit, delete, delete overdue task, delete all, jump to date, send route and saved as file. If you have set the alarm for the memo, alarm will sound when time is up, the content of memo will display at the same time. Alarm Five alarm clocks are set but deactivated by default. You can activate one, multiple or all of them as needed. For each alarm clock, the ringing date and the ringing time can be set.
5.7 File manager The phone provides a certain space for users to manage files and supports the T-Flash card. You can use the file manager to conveniently manage various directories and files on the phone and the T-Flash card. Open Choose File manager to enter the root directory of the memory. The root directory will list the default folders, new folders and user files.
Dual SIM switch Manually selected by user and automatically decided by SIM cards are available for you to choose. You can select one of them as per your needs. Dual SIM Settings Dual-SIM refers to two SIM card slots, and the two cards can standby at the same time or set one of them to display on the idle screen. Flight mode Normal mode and Flight mode are available for you to choose.
Display Users can access this item to set wallpaper, screen saver, power on/off display, etc. Call settings Caller ID: You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set by the network is chosen. Note: This function relates to the network. If you select Hide ID, dialing may fail. Therefore, make sure that calls can be normally dialed before you choose Hide ID. Call waiting: After you choose Activate, the mobile phone will contact the network.
Advanced setup Blacklist: Access this menu to set blacklist and its members. Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile phone will automatically redial the number a moment later if the called party does not reply. The number of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other numbers. To end the auto redial process, press the End key.
Preferences: Select the preferred networks. By default, the network where the current SIM card is registered will be displayed. Security Settings This function provides you with related settings about safety use SIM1 security PIN lock: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to On, you need to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three consecutive times, you need to input the PIN Unblocking Key (PUK).
Sound effects Set audio effects as per your need. 5.10 User profile The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments. Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall into five scenarios: General, Silent, Meeting, Outdoor and My style. When you insert an earpiece to the mobile phone, the mobile phone automatically enters the Headset mode.
5.11 Services STK STK service is the tool kit of SIM card. This phone supports the service function .The specific items are depended by SIM card and network. Service menu will be auto added to the phone menu when supported by network and SIM card. Internet service This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way.
6 Appendix Appendix 1:Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault Cause Solution The SIM card Contact your network service provider is damaged. The SIM card is not in Check the SIM card SIM card error position. The metal face of the Clean the SIM card with a clean cloth SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone is not in a service area of the GSM network The battery cannot be charged The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with
FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
4RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: YHLBLUDECOMN.