BLU ARIA POD+ Quick Guide
Dual-ear mode: Initial use of headsets Take out both left and right earphones from the charging box when using it for the first time. Tear off the film. Put both earphones back into the charging box. The two earphone indicator lights is on. The headset is activated. Basic Operations Automatic power on/off: Open the lid of the charging box, the headset will automatically turn on and the TWS connection is successful. The headsets automatically shut down after 3 minutes of pairing timeout.
Connection: After the left and right earphones are paired, open the cover of the charging box, the white LED of the earphone is flashing quickly. Search for the pairing name on your mobile phone, click Connect, and the phone will have an electronic alert tone if it is successfully connected. Apparel Please follow the diagram to penetrate the earphone into the ear, press the R<> right ear and LRR<> ear correspondence.
Receive a call: When there is an incoming call, you can double-tap either the left earphone (L) or the right earphone (R) to receive the call. Terminate a call: During a call, you can double-tap the left earphone (L) or right earphone (R) to terminate the call. Cancel outgoing call: When the call is made, double-tap the left earphone (L) or right earphone (R) to cancel the outgoing call.
on, they are actively re-connected to the last paired one devices. iOS battery level display: After the earphone is connected to the iOS, the battery level of the earphone can be displayed. Charger and Battery Before using any charger to charge this earphone, check whether the specifications of the charger meet requirements. The recommended output voltage of the charger is DC5V+/-0.25V, and the recommended output current is 100 mA to 500 mA. An over-high charging voltage may damage the earphone.
is not used in a long time, keep it in a cool and well-ventilated place, and charge the earphone once every two months. 1.When the white LED light of the connected headset flashes with a "beep" tone, it indicates that the headset is low on power. If you continue to use it, it will automatically shut down. At this time, you need to put the headset back into the charging box to charge. 2.
talk time and standby time may vary with cell phones, settings, use methods, and environment. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.