User's Manual
Table Of Contents
- Introduction
- Indications
- Intended Use
- Contraindications
- Technical Support
- Features
- Setup Instructions
- Maintenance and Troubleshooting
- Technical Data
- Symbols
- Symbols
11
Figure 8. Merlin PSA Model EX3100
1. Functional Status LEDs
2. Pace and Sense LEDs
3. Receptacle for patient cable or patient-cable adapter
4. Receptacle for inductive telemetry wand
5. Receptacle for ECG input
6. Connectors to Merlin PCS
To place the Merlin PSA into the storage compartment, follow the steps below. To remove the
Merlin PSA from storage compartment, reverse the steps.
1. Turn off the Merlin PCS.
2. Remove the Merlin PCS storage compartment door by raising it at a 90 degree angle.
3. Grip the lid so you can pull on one side and push on the other side.
4. Loosen the lid from the hinge on one side.