User Guide

BlueParrott B550-XT User Guide
PAGE 13
ADVANCED FEATURES AND FUNCTIONS
Multiple Device Pairing and Multipoint Mode
The B550-XT has pairing memory for up to eight (8) devices. The headset
can also use Multipoint Mode, which means that it can be connected to two
Bluetooth devices at the same time. You do not have to do anything to enable
Multipoint Mode.
Using the B550-XT in Multipoint Mode
1. To use the headset in Multipoint Mode, first make sure
the headset is paired with both your devices.
2. With both devices in range and with their Bluetooth enabled,
turn the headset on.
3. As each Bluetooth device connects to the headset,
you will hear the voice prompt, “Your headset is connected.”
The B550-XT will monitor both phones and enable you to answer a call on
either one using the headset.
If you are on a call and the other device receives a call, you will hear a
notification in the headset.
Disabling and Re-enabling Multipoint Mode
Multipoint Mode can be disabled with the following process:
1. “Unpair” (Android) or “forget” (iOS) the B550-XT
from your phone’s Bluetooth list.
2. Power on the headset.
3. Press and hold the Parrott Button, MFB and Volume Up buttons
together for 6-7 seconds. The MFB LED will flash blue twice,
and the headset will enter pairing mode.
4. Re-pair the B550-XT to your device.
5. Multipoint Mode is disabled and the headset can only
be used with one device at a time.
If you wish to re-enable Multipoint Mode, repeat the process above.