Blueair 500/600 Series User Manual Blueair 500/600 Series
Contents 2 Welcome 3 Getting started 4 Getting the most from your Blueair system 6 Changing the filters 7 Filters Welcome Thank you for choosing Blueair. Before you start using your Blueair air purifier, take a few minutes to become familiar with the basics. Filter replacement Be sure to change your Blueair filters according to the recommended filter replacement schedule. This helps keep your Blueair air purfiier running in top condition. See page 7.
Getting started General safety instructions • Use the grounded three-prong power cable provided with your Blueair unit. The plug fits into a grounded three-prong outlet. Do not alter the plug in any way. • Use the cable provided to plug the Blueair unit directly into an appropriate electrical outlet (please refer to the voltage label on your unit). The cable is packaged beneath the unit. Placement Place the unit in a location that allows air to circulate freely in, out and around the unit.
Care and maintenance Blueair air purifiers feature award-winning Swedish design, materials and workmanship. To keep your unit in top condition, we recommend routine cleaning. • Vacuum the air intake grille from the inside when you remove the filters to replace them. • Vacuum the small inlets with a soft brush attachment. • Wipe the exterior of the unit with a soft, clean, damp cloth. • Never clean with gasoline, chemical solvents or corrosive material also as these agents may damage the surface.
Getting the most from your Blueair system The Blueair system is easy to use. Make sure your unit is the right size for your room, and change the filters according to recommended filter replacement schedule. Remember that, just as air conditioners and heaters have limits to the volume of air they can cool or heat, every air purification system has limits to the volume of air it can clean. Follow these common-sense guidelines.
Changing the filters Step 1 Step 2 Unplug the unit and lift the lid from the top of the unit. Remove the filter on top. Step 3 Step 4 Remove the filters on each side. Vacuum the grille from the inside. Guide the first and second replacement filters into the side slots. Ensure that the side with the words “facing out” is turned toward the outer wall of the unit. Step 5 Step 6 Place the third filter on top of the unit and ensure that the side with the words “facing out” is facing upwards.
Filters Patented HEPASilentTM technology makes the Blueair 500/600 Series incredibly quiet. The unit comes with a complete set of three HEPASilentTM filters already installed. Particle Filter Kit. Includes three particle filters that remove dust, pollen, bacteria, pet dander, mold spores and other airborne particles. The particle filter is made of polypropylene, which help mechanically filter out airborne particles.
Our philosophy Blueair believes in cleaner indoor air for everyone. Removing air impurities down to the tiniest particle requires a deep commitment to continuous innovation and a greener global environment. Our fresh air solutions are not only inventive, but extremely effective, energy efficient and ecofriendly. At Blueair we believe that clean air is a human right. www.blueair.com Blueair Inc. Blueair AB 17 N.