Blueair Classic User Manual - 400 series
Before using Blueair Classic 400 series, please read this user manual carefully. Note: There may be local variations of these models.
Overview of unit General 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Blueair 400 series Blueair 400 series air purifiers are Wi-Fi enabled and are available in two models. The 480i models have built-in sensors for PM2.5, VOC, temperature/humidity, and the 405 models with no built-in sensors. Adjustments to the air purifiers can be made manually anywhere and at any time, either via the touch buttons on the control panel located under the flip-up lid, or remotely via the Blueair FriendTM mobile app.
Safety information The Blueair 405 and 480i air purifiers are electrical appliances. Please read the safety instructions before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The Blueair Limited Warranty applies only if the unit is used according to these instructions. WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Control panel and touch buttons Placing the unit 4 ins 10 cm Place the unit in a location where air can circulate freely in, out and around the unit. Do not place the unit near sources of heat, such as radiators, fireplaces or ovens. The control panel and touch buttons are located under the flip-up lid (see Step 2 “Starting up the unit”). A grey circle around a touch button indicates that it is inactive.
Classic 480i control panel touch buttons Wi-Fi FILTER AUTO VOC PM 2.5 VOC indicator Status blue - from excellent to moderate pollution levels Status orange - from slight to high pollution levels Filters Auto speed Status circle blue - unit is on Status symbol grey - Auto speed OFF Status symbol blue - Auto speed ON PM2.5 indicator Status blue - from excellent to moderate pollution levels.
Changing the filters Care and maintenance IMPORTANT! Always turn off and disconnect the unit from the supply mains before changing filters, cleaning or carrying out maintenance procedures.. Step 1 Step 2 Open the back door. Slide out the filter. We recommend routine cleaning in order to keep your unit in top condition. When changing filters 1. Wipe clean the underside of the lid after removal. 2. Vacuum the air inlet grille from the inside using a soft brush and/or other suitable attachment. 3.
Classic 480i/405 technical specifications* CADR (cfm)**: 280 Room size Pollen Dust Smoke 300 300 434 sq.ft. (40 m2) Air Changes per Hour *** 5 Airflow (Speed 1-2-3) 120-200-350 cfm Size (HxWxD): 23 x 20 x 11 in.
www.blueair.com Blueair AB Danderydsgatan 11 SE-114 26 Stockholm Sweden Tel: +46 8 679 45 00 Fax: +46 8 679 45 45 info@blueair.se Blueair Inc. Suite 1900, 100 N LaSalle Street Chicago, IL 60602 Tel: +1 888 258 3247 Fax: +1 312 727 1153 info@blueair.com 900130_CLA400_EN_UM_REV00 Blueair India Pvt. Ltd. Embassy of Sweden Nyaya Marg, Chanakyapuri New Dehli – 110021 Tel: +91 11 4606 7121 Fax: +91 11 4606 7120 india@blueair.se Blueair (Shanghai) Trading Co. Ltd. Rm 1005 City Gateway No.