Manual

ManualsBrandsBlue Angel Pumps ManualsPumpsBGPS400

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain

the product described. Protect yourself and others by observing all safety information. Failure to comply with

instructions could result in personal injury and/or property damage! Retain instructions for future reference.

The Pro

fes

sional’s Line

Engine Driven

Centrifugal Pump

Description

The Blue Angel pumps are general use

centrifugal water pumps. The pump is

equipped with a Viton

seal assembly

that is also compatible with many

agricultural chemicals.

Safety Guidelines

This manual contains information that is

very important to know and understand.

This information is provided for SAFETY

and to PREVENT EQUIPMENT PROBLEMS.

To help recognize this information,

observe the following symbols.

Danger

indicates

an imminently hazardous situation which,

if not avoided, WILL result in death or

serious injury.

Warning

indicates

a potentially hazardous situation which,

if not avoided, COULD result in death or

serious injury.

Caution

indicates a

potentially minor or moderate injury.

Notic

indicates

important information, that if not

followed, may cause damage to

equipment.

General Safety

Information

CALIFORNIA PROPOSITION 65

This

product

or its power cord may contain chemicals

known to the State of California to

cause cancer and birth defects or other

reproductive harm. Wash hands after

handling.

1. Know the pump application,

limitations, and potential hazards.

Read these rules and the instructions

carefully. Failure to follow them could

cause serious bodily injury and/or

property damage.

Never run engine in an

enclosed area. Exhaust gases

contain deadly poisonous

carbon monoxide, which has

no odor or taste.

Do not use to pump flammable

or explosive fluids such as

gasoline, fuel oil, kerosene, etc.

Do not use in flammable and/or

explosive atmospheres. Pump should only

be used with liquids compatible with pump

component materials. Failure to follow

this warning can result in personal injury

and/or property damage.

2. Observe all safety precautions for the

handling of the fuel.

Do not refuel a hot engine. Fuel

spilled on a hot engine could

result in a fire or explosion. Do

not refuel a running engine.

3. Pump should be located and should

rest on a level solid foundation. Do

not suspend pump by means of the

discharge pipe.

Be sure

pump is on

secure footing so it doesn’t fall over.

4. Do not use torches or apply excessive

heat, fire or flames to this pump as an

explosion may result.

5. Before working on the unit, insulate

the wire from the spark plug, by

disconnecting the spark plug wire from

the spark plug.

Complete

pump and

piping system MUST be protected against

below freezing temperature. Failure to do

so could cause serious damage and voids

the warranty.

6. Do not run pump dry. Water is

required to lubricate the shaft seal.

7. Pumping chemicals or corrosive liquids

with this pump may shorten the life of

the pump and may be hazardous to the

operator.

8. Personal Safety:

a. Wear safety glasses at all times when

working with pumps.

b. Keep work area clean, uncluttered

and properly lighted; replace all

unused tools and equipment.

c. Keep visitors at a safe distance from

the work area.

d. Make workshop child-proof with

padlocks, master switches, and by

removing starter keys.

9. This pump is designed for non-abrasive

fluid transfer; do not use as a trash

pump. Always use a suction strainer

with this pump to filter abrasive

material. Abrasive materials such as

sand and gravel will shorten the life of

the pump.

Operating Instructions and Replacement Parts List

BGPS400

See Warranty on page 8 for important information about commercial use of this product.

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or ﬁ le it for safekeeping.

320601-002 7/07

Need

Assistance?

Call Us First!

1-888-636-6628

For parts, product & service information

visit www. blueangelpumps.com

Summary of content (8 pages)

PAGE 1
See Warranty on page 8 for important information about commercial use of this product. BGPS400 Operating Instructions and Replacement Parts List Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
PAGE 2
Operating Instructions and Replacement Parts List Installation This pump is designed to be self-priming when installed and operated as specified below. 1. The pump should be placed as close as possible to the liquid being pumped. A pump with 20 foot suction lift will not remove water as quickly as a pump with 5 foot suction lift (Figure 1). 20 Ft. Suction Lift 5 Ft. Suction Lift Figure 1 2. Suction hose and fitting must be airtight. An air leak in the suction line may prevent priming of the pump.
PAGE 3
BGPS400 Performance Information 2” Cast Iron Pump Performance CAPACITIES IN GALLONS PER MINUTE Discharge Head Feet Dynamic Suction Lift - Feet 0 5 10 15 20 25 20 110 107 103 100 94 87 30 103 100 94 87 80 73 40 94 87 80 73 68 61 50 80 73 68 61 55 47 60 68 61 55 47 40 30 70 55 47 40 30 21 12 80 40 30 21 12 0 0 FEET FRICTION LOSS IN 100 FEET OF PLASTIC PIPE Pipe Size 20 25 30 40 50 1 1/4 5.6 8.5 11.9 20.2 30.5 1 1/2 2.6 4.0 5.5 9.4 1.
PAGE 4
Operating Instructions and Replacement Parts List For Pump Accessories, call 1-888-636-6628 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown SUCTION HOSE PART #16510-002 • Reinforced to prevent collapse under suction Hose coupled both ends with 2” hose thread. One 20 ft. hose per carton Address parts correspondence to: Blue Angel Pumps 101 Production Drive Harrison, OH 45030 U.S.A.
PAGE 5
BGPS400 For Replacement Parts, call 1-888-636-6628 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown Address parts correspondence to: Blue Angel Pumps 101 Production Drive Harrison, OH 45030 U.S.A. 1 8 13 10 2 5 3 3a 4 6 9 11 7 Item No.
PAGE 6
Operating Instructions and Replacement Parts List Notes www.blueangelpumps.
PAGE 7
BGPS400 Maintenance / Service Record Date Maintenance Performed Replacement Components Required www.blueangelpumps.
PAGE 8
Operating Instructions and Replacement Parts List BGPS400 Limited Warranty For one year from date of purchase, Blue Angel will repair or replace, at its option, for the original purchaser any part or parts of its Sump Pumps or Water Pumps (”Product“) found upon examination by Blue Angel to be defective in materials or workmanship. Please call Blue Angel (1-888-636-6628) for instructions or see your dealer. Be prepared to provide the model number when exercising this warranty.