Owners Manual

!
1
1!
- Amplifier or speakers muted.
- No connection to the speakers.
- No connection between turntable and amplifier.
-Wire leads not connected the cartridge.
Strong hum on phono input:
- No ground connection from cartridge, arm, or arm cable to amplifier or ground
loop.
- Turntable too close to speakers.
Distorted of inconsistent sound from one or both channels:
- Turntable is connected to wrong input of amplifier.
- Needle or cantilever damaged.
- Drive belt overstretched or dirty.
- Platter bearing without oil, dirty or damaged.
- Dust on stylus.
- MM / MC switch on pre-amplifier set incorrectly.
Useful Tips:
The turntable should be positioned on a low-resonance surface such as wood or
multiple layer ply board to avoid structural vibrations disturbing playback.
To!view!the!Blue!Au ra!range!of!Turntable!and!V inyl!Care!Accessories!please!
visit!!https://www.blueaura.co.uk/product-accessories!or!scan!this!code