Owners Manual

!
8!
which is connected to the mains power will switch to standby mode automatically if
no music has been playing for about 20 minutes.
Operation
How to play a record
1. Connect the included power adapter to unit and press the power rocker switch to
be “ON” position.
2. Remove the needle cover from the cartridge.
3. Place the slip mat on the platter and place a record on the slip mat. If using 45
RPM records, put the 45 RPM adapter on the center spindle before placing the
record on the platter.
4. Set the 33/45 RPM Selector according to the type of record.
5. Turn the Start/Stop dial to the Start position to begin spinning the platter.
6. Unlock the arm clip and set the Lift Lever to the up position.
7. Position the tonearm over the desired location (groove) on the record.
8. Move the tonearm lift lever to the down position to move the tonearm toward the
record. Alternatively, place the needle over the desired location on the record.
9. Carefully lower the tonearm on the record.
10. When you are finished playing the record, raise the tonearm, return it to rest on
the arm clip, and turn the Start/Stop dial to the Stop.
Bluetooth Operation
This unit has a Bluetooth transmitter to send audio to a Bluetooth speaker or
Headphones wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the unit, the BT will auto search when the unit turns on, the BT
indicated light flashing.
3. When pairing, the light will flash twice per second, then change to be long lighting
when paired.