Operating instructions

9
To use your speakers with a PC or MAC
To use your speakers with other devices (RCA connection)
The transmitter needs to be powered; by using the USB connector on a PC for example, power is provided.
To use the transmitter with equipment that does not have a USB socket the mains adapter is required.
Connect the USB connector from the transmitter to the USB socket on the supplied mains adapter.
Using the “line out” cable provided, plug the red and white plugs (RCA) into your device with line out, e.g. CD player or TV,
connect the other end of the cable (mini jack) to the transmitter.
Plug the adapter into to a convenient wall socket and turn on.
Push the button in the centre of the transmitter to select a free zone.
Using the remote control press the “station” button” to nd the signal from the new source equipment.
Wireless Connection Methods
MAC set-up
1.Insert the USB connector from the
transmitter to a free USB socket on your
MAC.
2.Go to System Preferences and under
Hardware choose Sound.
3.Click Output in Menu and choose USB
headset.
PC set-up
1.Insert the USB connector from the transmitter to a free USB socket on your PC or
laptop.
2.Wait until the software has been installed, usually a conrmation beep or
message window alert.
If the above instructions do not work you may need to do the following.
Click Start button on PC, go to the Control Panel, and choose Sound & Sound
Devices
Under Playback of Audio; Default unit choose USB headset.
If you are still having problems please contact [e-mail].