User's Manual

2.6 USB Dongle Installation
CT100 can use an USB dongle to communicate with other devices through a wireless connection. Use the
following procedure to install or change the USB dongle in the CT100 terminal:
a. Turn the terminal over so that you are facing the back of the terminal
b. Remove the set screw and the dongle cover
c. Insert the communication dongle into the terminal’s USB port. (Figure 9)
d. Insert the dongle cover into the slot.
e. Use the screws to lock the dongle cover into place.
(Figure 9) Install USB Dongle
Note:
Blue Bamboo does not provide USB dongle as an accessory with the CT100 Contactless terminal, but the user
can integrate certain types of certified USB dongle (such as GPRS, Bluetooth, etc) provided by other
manufacturers with the terminal to transmit the data with other devices through wireless connection.
2.7 Contactless Card Reader Transactions
To conduct a contactless card reader transaction:
a. Position the contactless card and ensure the card face towards the card reader within 3
centimeters. Tap the card above the card reader for several seconds.
b. Remove the card when the buzzer beeps, the transaction information will be displayed on the
screen. Premature removal voids the transaction.
Set Screw
Dongle Cover
USB Port