Air Purifier BB-AP800-59-W-WF USER MANUAL
Contents 1. Important safety information 01 2. Product Structure 04 3. Before first use 05 4. Instructions for use 10 5. Filter Replacement 16 6. Troubleshooting 19 7.
1. Important safety information Read this user manual carefully before you use the appliance and save it for future reference. Danger ● Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard. ● Do not clean the appliance with water or any other liquid or a (flammable) detergent to avoid electric shock and/or a fire hazard.
Caution ● This appliance is not a substitute for proper ventilation, regular vacuum cleaning or use of an extractor hood or fan while cooking. ● If the wall socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure you plug the appliance into a properly connected wall socket. ● Always place and use the appliance on a dry, stable, level and horizontal surface.
FCC NOTE: Reminding of part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2. Product Structure 9 ⑦ Dust Sensor ⑧ Power Supply Inlet ⑨ Wheel ① Air Outlet ② Touch Panel ③ Digital Display ④ Composite Filter ⑤ Pre-Filter ⑥ Filter Cover Description for the function of display panel A1: Temperature(℃) A2: Humidity (%RH) A3: WIFI icon A4: PM2.5 data A5: PM2.5 icon A6: PM2.
3. Before first use 3.1 Learn about the air purifier indicator Read this user manual carefully before you use the appliance and save it for future reference. Air Quality Indicator Reminder:Air quality is not displayed in standby mode considering standby power consumption. In the first 10 seconds after the dust sensor is started, the PM2.5 data window shows "-- --", which is in the process of collecting data. 3.2 Filter cover disassembly and installation method 3.2.
3.2.2 Installation method Reinstall the filter cover: align and insert the fixed groove, and apply pressure on the “ ” icon on the filter cover to secure the filter cover. 3.3 Filter installation All filters are included inside the air purifier, but be sure to remove the filter before using the product. Follow the instructions below to remove all filters and remove their packaging, then put them back in the purifier.
[3] Pull out the filter inside the purifier. [4] Remove all packaging materials from the filter. [5] Put the filter back in the purifier. [6] Reinstall the filter cover, align and insert the fixed groove, then apply pressure on the “ ” icon on the filter cover to secure the filter cover. [7] Repeat the above steps to assemble the air purifying screen on the other side of the product.
3.4 Filtering effect Clean air output Polluted air entering Polluted air entering [note] The pictures are for reference only. If there is any difference between the actual objects and the pictures, please refer to the actual product, the company reserves the right to interpret. 3.4.1 ■ Combine multiple functions into one ■ Efficient purification of PM2.
3.4.2 Unique 5-fold purification technology Pre-filter High Efficiency Activated Carbon High Efficiency HEPA Pre-filter Interception of hair, Fiber velvet, large particles, dander and so on High Efficiency Activated Carbon It adopts high quality activated carbon, modified by special proprietary technology, and purifies formaldehyde and other gas pollutants efficiently High Efficiency HEPA Effectively purify PM2.
4. Instructions for use 4.1 Control panel function description 2 3 1 4 ■ On/Off ■ Key Lock ■ WiFi 5 ■ Filter Replacement Indicator ■ Fan speed (1/2/3/4/Auto Mode/Sleep Mode) 4.2 Plug in the power supply The LED on the control panel will be on for 1 second, and you will hear a click, then the indicator will be extinguished again and enter standby mode. 4.3 Turn on the air purifier In the standby state, touch the “ the working state.
4.4 Fan speed adjustment In the working state, touch the ring area (the area corresponding to the function icon) and enter the manual fan speed setting. Choose the wind fan between "1/2/3/4/Auto Mode/Sleep Mode". When the corresponding mode is selected, the indicator light will be blue with sound prompt. 4.
4.8 Keylock mode Press and hold the “ ” button for 3 seconds in the working state to activate the Keylock mode. At this time, pressing the other buttons will not respond. The KeyLock indicator flashes 2 times to remind the user to unlock; long press the “ ” button for 3 seconds, the touch panel can be unlocked and the Keylock indicator is off, other keys can be operated normally. 4.9 Filter replacement Mode The filter life is defined as 2160 hours.
01 01 Register account or Log in with existing account. 02 02 Add device. 03 03 Click “Small Home Appliances”, Then choose “Air Purifier”.
04 04 Input wifi password. 05 05 06 06 Connecting. 14 Click Finish network configuration.
07 07 Device added successfully. 4.12 Clean air purifier Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and outside. 1). Wipe away dust with a soft dry cloth from the body of the purifier. 2). Clean the air inlet and the air outlet with a soft dry cloth. Note : ● ● ● ● Always unplug the purifier before you clean it. Never immerse the purifier in water or any other liquid.
5. Filter replacement When the product's filter replacement indicator lights up and flashes, the user is suggested to replace the filter. When the replacement filter indicator lights up, the customer is suggested to replace the filter. Note:When the filter replacement indicator is lit and the buzzer sounds awkward, the user is reminded that the new filter needs to be replaced, but the purifier can still work normally. Note:Please turn off the power and cut off the power plug before replacing the filter.
[3] Press the “ ” button on the filter cover with both hands, spread the filter cover, and pull the filter cover up slightly. [4] Remove the purifier insider filter. [5] Remove all packaging materials from the new filter. [6] Load a new filter.
[7] Reinstall the filter cover, align and insert the fixed groove, and then press the button on the filter cover to apply pressure to secure the filter cover. [8] Repeat the above steps and replace the air purification screen on the other side of the product. After replacing the new filter, plug in the power plug and press the “ ” button for 3 seconds to reset the filter life. When the indicator is off means filter reset is complete. 5.2 Long idle time Unplug the power plug.
6. Troubleshooting This chapter summaries the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, please contact our service center or distributor.
Cleaning Instructions WARNING Unplug from electrical supply source before cleaning. After servicing, any safety device (including grilles and blades) must be reinstalled or remounted as previously installed. Use soft damp cloth, then wipe with dry cloth. Do not use harmful cleaners. Do not bend the blades.