Use and Care Manual

The filter life is defined as 2160 hours. When the
filters have been running for 2160hours, the replace-
ment filter indicator light starts to flash, reminding the
user that the filter needs to be replaced and that the
filter life need to be reset.
In the working state, when the replacement filter
indicator light flashes, long press the “ ” button
for 3 seconds, the flashing indicator light is off, and
the button is accompanied by the buzzer “Bee”, the
filter life is reset successfully.
Reminder:The remaining time of filter life is more than 432 hours, and the filter life
progress light is always white. The remaining time of filter life is less than 432 hours, and
the filter life progress light turns red and stays on. When the remaining time of filter life is
zero, the filter life progress light flashes red, and the indicator light flashes when replacing
the filter life.
4.9 Filter replacement Mode
4.10 Connect to WiFi
Press and hold the “ ” button for 3 seconds in
the working state to activate the Keylock mode. At
this time, pressing the other buttons will not respond.
The KeyLock indicator flashes 2 times to remind the
user to unlock; long press the “ ” button for 3
seconds, the touch panel can be unlocked and the
Keylock indicator is off, other keys can be operated
normally.
At the standby mode, long press for 5 seconds,
when indicator light flashes , then enter WiFi
network pairing mode. Please connect your smart phone
to WiFi and operate it according to following steps.
Note: If purifier has been successfully connected to
WiFi, indicator will stay on.
4.8 Keylock mode
12
Scan QR code to
download the APP.