Operating instructions

Operating Instructions and Parts List AR383
10
www.arnorthamerica.com
32. Place notch on high pressure
hose in plastic notch on hose
reel.
33. Using right hand turn handle
away from you to wind up
hose.
34. Using left hand guide hose
across.
35. When you reach tabs on the
left side start guiding hose back
to the right.
36. Continue guiding hose back
and forth until entire hose is on
the reel.
hoSe reel inStrUctionS (cont)
(hoSe reel IS for STorage only)
37. Wind until hose end catches at
the top of the reel.
38. Push handle in to lock reel.
A clogged or partially clogged noz-
zle can cause a significant reduction
of water coming out of the nozzle
and cause the unit to pulsate while
spraying.
To clean ouT The nozzle:
• Turn off the unit.
• Turn off the water supply.
• Relieve any pressure trapped in
the hose by squeezing the trig-
ger 2 - 3 times.
• Separate lance from gun.
• Rotate nozzle to the narrow
stream setting. This opens up
the fan blades.
• Using the included tip cleaner,
or an un-folded paper clip.
nozzle cleaninG inStrUctionS