Instructions / Assembly

VALVE SETTING FOR WOOD-BURNNG FIREPLACE:
1. Turn valve to OFF posion by turning key, #1 clockwise unl it stops.
2. Remove key, #1.
3. Loosen set screw, #2 using Allen Wrench, #3 (included), so the inner
adapter, #4 is free.
4. Rotate inner adapter, #4 so the roll pin, #5 is in the middle (22,000
Btu/hr-1/4 turn) of the sliced opening of the inner adapter #4.
5. Tighten set screw, #2.
6. Once the valve is installed, insert key, #1 and turn counterclockwise
to turn ON and clockwise to turn OFF.
VALVE SETTING FOR SMALL ARTIFICIAL LOG SETS:
1. Turn valve to OFF posion by turning key, #1 clockwise unl it stops.
2. Remove key, #1.
3. Loosen set screw, #2 using Allen Wrench, #3 (included) so the inner
adapter, #4 is free.
4. Rotate inner adapter, #4 counterclockwise, so the roll pin, #5 is at the end
(44,000 Btu/hr-1/2 turn) of the sliced opening of the inner adapter, #4.
5. Tighten set screw, #2.
6. Once the valve is installed, insert key, #1 and turn counterclockwise to
turn ON and clockwise to turn OFF.
VALVE SETTING FOR FIRE PITS:
1. Turn valve to OFF posion by turning key, #1 clockwise unl it stops.
2. Remove key, #1.
3. Loosen set screw, #2 using Allen Wrench, #3 (included) so the inner
adapter, #4 is free for BTU’S of up to 270,000.
4. Once valve is installed, insert key, #1 and turn counterclockwise to
turn ON and clockwise to turn OFF.
www.blueflamestore.com 800-321-6566 U.S. Patent 8,282,073
Please note: Each application can vary from fire pit to fire pit, depending on their de-
signs. The valve should be supported and protected from outside elements such as heat,
sun, and rain. Installation of valve should comply with applicable installation codes.
www.blueflamestore.com 800-321-6566 U.S. Patent 8,282,073
VALVE SETTING FOR WOOD-BURNNG FIREPLACE:
1. Turn valve to OFF posion by turning key, #1 clockwise unl it stops.
2. Remove key, #1.
3. Loosen set screw, #2 using Allen Wrench, #3 (included), so the inner
adapter, #4 is free.
4. Rotate inner adapter, #4 so the roll pin, #5 is in the middle (22,000
Btu/hr-1/4 turn) of the sliced opening of the inner adapter #4.
5. Tighten set screw, #2.
6. Once the valve is installed, insert key, #1 and turn counterclockwise
to turn ON and clockwise to turn OFF.
VALVE SETTING FOR SMALL ARTIFICIAL LOG SETS:
1. Turn valve to OFF posion by turning key, #1 clockwise unl it stops.
2. Remove key, #1.
3. Loosen set screw, #2 using Allen Wrench, #3 (included) so the inner
adapter, #4 is free.
4. Rotate inner adapter, #4 counterclockwise, so the roll pin, #5 is at the end
(44,000 Btu/hr-1/2 turn) of the sliced opening of the inner adapter, #4.
5. Tighten set screw, #2.
6. Once the valve is installed, insert key, #1 and turn counterclockwise to
turn ON and clockwise to turn OFF.
VALVE SETTING FOR FIRE PITS:
1. Turn valve to OFF posion by turning key, #1 clockwise unl it stops.
2. Remove key, #1.
3. Loosen set screw, #2 using Allen Wrench, #3 (included) so the inner
adapter, #4 is free for BTU’S of up to 270,000.
4. Once valve is installed, insert key, #1 and turn counterclockwise to
turn ON and clockwise to turn OFF.
Please note: Each application can vary from fire pit to fire pit, depending on their de-
signs. The valve should be supported and protected from outside elements such as heat,
sun, and rain. Installation of valve should comply with applicable installation codes..
# 4
Inner
Adapter
#2 Set
Screw
#1 Key
#3 Allen Wrench
# 5
Roll Pin
Please keep these instrucons for future use and future home owners
Artificial log set
Setting
Wood - Burning
Setting
# 5
Roll Pin
Wood - Burning
Setting
Please keep these instrucons for future use and future home owners
Artificial log set
Setting
#1 Key
#3 Allen Wrench
#2 Set
Screw
# 4
Inner
Adapter