Replacement Part List

[e-mail]
7
1-800-348-5004
Fig.1
Assembly of guide bar and saw chain
1. Place the chainsaw on a suitable flat surface.
2. Loosen nut (8) on sprocket cover (13), and remove sprocket cover (13) (fig.2)
Fig 2
3. Place the chain (9) in the groove of the guide bar (10). Pay attention to the correct
running direction, as shown by the rotation direction symbol (fig.3)
Fig.3
4. Place the chain around the sprocket (15) and put the bar on such that the locating peg（14）
fits into the slotted hole of the bar. (fig.4)