Installation Guide

Seals threads on all Metals, PVC, CPVC,
ABS and Nylon Plastic Pipe Systems
Heavy-Duty Industrial Grade with PTFE
BLUE MONSTER Industrial Grade PTFE enriched Pipe Thread
Compound is a slow-drying, soft-setting, non-hardening pipe thread
compound. Blue Monster has a high bulk density, which means
there are more solids in the formulation. This allows you to work
the product into the valley of the threads giving you greater sealing
capabilities to fill any voids that occur under different tolerances of
pipe and fittings. Blue Monster with PTFE is recommended for on-site
or assembly line work. It is lead-free, non-toxic and will not harden or
separate in the can.
When applied properly, Blue Monster allows the system to be
pressurized immediately after assembly. It does not require any set or
cure time.
Blue Monster PTFE pipe thread sealant is formulated with
PTFE resin, a polymer consisting of recurring tetrafluoroethylene
monomers whose formula is (CF
2
-CF
2
)n. It is inert and compatible
with a very wide range of materials.
• Heavy-Duty Industrial Grade
• Specially formulated for
production line use
• Adheres to oily threads
Industrial Grade PTFE
Pipe Thread Sealant
pw-G/dwv/sw
Standard 14
Standard 61
• Non-hardening
• Non-toxic
• Slow-Drying
• Easy-cleanup
• Soft-Set
• Grit-Free
• Low-Odor
• Acids, Dilute
• Air, Compressed
• Aliphatic Solvents
• Alkalis, Dilute
• Ammonia
• Brine
• Butane
• Carbon Dioxide
• Castor Oils
• Chlorinated Water
• Coal Tar Naptha
• Corrosives
• Cutting Oils
• Diesel Fuel Oil
• Fatty Acids
• Freons (All)
• Gasoline
• Glycol
• Heating Oils
• Helium, Gaseous
• Hydraulic Oils
• Hydrogen
• Inert Gases
• Jet Fuel
• Kerosene
• Lacquer
• Liquified Petroleum Gases
• Mineral Oils
• Naptha
• Natural Gas
• Nitrogen Gas
• Petroleum Solvents
• Propane
• Refrigeration Gases
• Soap, Liquid
• Steam Lines
• Sugar, Liquid
• Vegetable Oils
• Water, Potable
• Xylol
Blue Monster can be used on pipes carrying the following:
For Material Safety Data Sheets, contact Mill-Rose or
download directly from the Mill-Rose Clean-Fit website.
Formulated for
extra lubrication on metal pipe threads.
Requirements certified to ANSI LC 7-2009 and CAN
ULc S642-07 metal threads only through 2" in diam-
eter, +125
0
F TO -40
0
F, 125 PSIG for use with natural
and LP (vapor state) gases only.
Not recommended for use on oxygen systems. Use Clean-Fit 3-wrap
Oxygen PTFE Tape
Meets Mil. Spec. TT-S-1732
Temperature range: -50ºF (-45ºC) to +400ºF (204ºC)
Pressure ratings: Gases up to 3,000 PSI (210.9 kg/sq cm)
Liquids up to 10,000 PSI (703 kg/sq cm)
PTFE
The Mill-Rose Company • Clean-Fit Products
7310 Corporate Blvd., Mentor, OH 44060
To order call toll-free: [phone] or Fax [phone]
Visit our web site at www.CleanFit.com • E-mail: [e-mail]
BLUE MONSTER
®
Thread Sealant
Cat # Size Case Pack Weight
76001 1/4 pint / 4 fl. oz. / 118 ml 24 15 lbs.
76003 1/2 pint / 8 fl. oz. / 237 ml 24 23 lbs.
76005 1 pint / 16 fl. oz. / 473 ml 12 22 lbs.
76017 1 quart / 32 fl. oz. / .95 liter 12 42 lbs.
76000 2 ounce Tube 24 4 lbs.