User's Manual
Table Of Contents
- QuikCall Pagers Cover Page 321045
- Introduction
- Pager C ertifications
- Pager Dimensions and Weights
- Charger Dimensions and Weights
- Charger Components
- Connecting Power
- Mounting Chargers
- Combining Chargers
- Charging and Storing Pagers
- Paging Using a Desktop Controller
- Paging Using a Kitchen Controller or Expeditor Panel
- Paging Using a Desktop Controller and Telephone
- Replacing the Clip
- Replacing the Insert
- Insert Dimensions
- Replacing the Battery
- System Warranty - Back Page
4
Power
Adapter
Plug
Charger
Jack
Connecting Power:
1. Insert the Power Adapter plug into jack on the bottom of
the Charger.
2. Feed the wires through the guides in the bottom of the
Charger.
3. Connect the Power Adapter to the AC
Power Cord.
4. Plug the AC Power Cord into a
110-240VAC outlet.
5. The green LED on the Charger will light
(ON).
6. Once the Charger is powered (ON), the
Pagers can be inserted.
Mounting Chargers:
Chargers can be wall, shelf or counter top
mounted.
Mounting hardware is user supplied.
Mounting Chargers Connecting Power to Chargers