Owners manual

84-0177
Underslung SwayPro Locking Pin Kit
Installation Instructions
405-0350 Rev A Page 1 of 1 8/6/13
Item No. Part No. Description Qty.
1.................................222-0086 ...........................Locking Pin Spring ..........................................................2
2.................................229-0670 ...........................#6 x 1/4” Rivet .................................................................1
3.................................299-0567 ...........................Manual Release Locking Pin ........................................... 1
© 2013 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: [phone]
Fax: [phone]
www.blueox.com
2. Insert the locking pin into the bar pivot hole.
Stack two (2) springs on top of each other
and slide the springs into the slot of the bar
pivot until the springs seats into the groove
of the locking pin and the rivet hole lines up
with the holes in the springs.
3. Install the rivet into the hole thru the locking
pin springs and bar pivot of the hitch head.



3
2
1
1. Remove the existing rivet, locking pin spring and locking pin from the hitch
head.
Preferred Removal: Using a 3/32” punch and hammer, drive the existing rivet
out of the bar pivot from inside the bar pivot cavity.
Optional Removal: Using a at screwdriver and hammer, drive the screwdriver
in between the spring and bar pivot from the end. Pry straight up on the spring
an rivet to release from the bar pivot.
CUSTOMER SERVICE COMMITMENT
Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime with our
products. Our team is here to assist you with any questions you may have regarding the performance of your
product. Simply call [phone] and you can speak with our customer care team.
Additionally, please visit our website to see which rallies our Destination America team will be attending. For a
nominal fee, our service technician will service your towing system to ensure it’s in proper working condition.
Also, as a commitment to our customers, should you visit our factory, you can stay at our full service Blue Ox®
campground at no charge along with enjoying a factory tour.
Again, thank you for being our customer and for the condence you have shown in the performance of our
products. It is because of customers like you we enjoy the success we have today.
Step #3Step #2
Step #1