Owners manual

BX1126
2007-12 Jeep Wrangler
(Includes Sport)
Installation Instructions
292-2909 Rev. H Page 1 of 7 8/26/11
1. Blue Ox
®
towing products and accessories are
intended to be installed by Blue Ox
®
Dealers
who are familiar with our products and have the
equipment and knowledge to do “t work”. When
necessary, Blue Ox
®
Dealers can be found at
www.blueox.com or by contacting our Customer
Care Department at [phone].
2. Many Blue Ox
®
Baseplates are designed to
use existing holes and hardware to mount the
baseplate to the towed vehicle. Even though
bolts are there, do not assume they are adequate
for baseplate mounting. Always use hardware
supplied in the hardware kit or existing hardware
specied in the Baseplate Installation Instructions.
Serial Number
Conrm the towability and pre-towing
procedures for your vehicle with the
owner’s manual or contact the vehicle’s
manufacturer for specic towing
procedures.
Please read BOTH these Installation Instructions and the General Towing
Instructions before attempting to install or operate this equipment.
Bolt Size Grade 5 Grade 8
1/4” 10 14
5/16” 19 29
3/8” 33 47
7/16” 54 78
1/2” 78 119
5/8” 154 230
Bolt Torque Specications
Torque in Foot-Pounds for Inch Bolts
Bolt Torque Specications
Torque in Foot-Pounds for Metric Bolts
Bolt Size Grade 8.8 Grade 10.9
6MM 6 8
8MM 16 22
10MM 31 40
12MM 54 70
14MM 89 117
Attachment Tab Height: 14-1/2”
Attachment Tab Width: 24”
If the front of your vehicle looks different than
this, call us at [phone].
!
Failure to read and follow these instructions
could result in separation of the towed vehicle
from the tow bar, causing property damage,
loss of towed vehicle, personal injury or death.
WARNING