Owners manual

BX2724
2012 Kia Rio - Hatchback Only
Installation Instructions
405-0276 Page 8 of 9 4/18/12
13. The temperature sensor will need to be relocated from the slot to the adjacent hole. In order for
the sensor to t you must trim the attachment bracket. The horn will be placed in the slot that the
temperature sensor was originally located in.
14. After the front fascia has been reinstalled
trim the grill to allow ample room for the
attachment tabs. Do this on both sides.
15. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate. The photo above shows the
recommended installation of the cables to
frame of vehicle. Additional options may
interfere with suggested mounting; in this
case, secure the cables to a solid piece of
the frame as described in the instructions
included with the permanent baseplate safety
cables. Be sure the safety cables do not rub
against any hoses or moving parts. Do this
on BOTH sides of the vehicle.
16. In order to install the breakaway bracket you must drill thru the existing hole in the bumper which
is located next to the connector rods.
17. Dealer or installer be certain the user receives the instruction sheet.