Owners manual

BX3784
2008-12 Toyota Scion XB
(with fog lights)
Installation Instructions
405-0054 Rev. F Page 2 of 9 1/25/12
Tools Required
10MM Socket 10MM Wrench Drill
9/16” Socket 9/16” Wrench Flat Screwdriver
3/8” Nut Driver Utility Knife Large Vise Grips
1” Hole Saw Reciprocating Saw 13/32” Drill Bit
Loctite
®
RED
Parts List
Ref. No. Qty. Part # Description
1 1 61-6622 WLDM’T, BASEPLATE, BX3784
2 9 61-5208 WLDT, NUT PLT, 1/4X1X1, 3/8” BLT WIR
3 8 201-0443 3/8-16 X 1” HEX BOLT GRD.5, ZP
4 5 201-0440 3/8-16 X 1 1/2” HEX BOLT, GRD.5, ZP
5 13 203-0010 3/8” LOCK WASHER, ZP
6 4 202-0003 3/8-16 HEX NUT, ZP
7 3 201-0655 6MM-1.0 X 30MM HEX BOLT, GRD8.8,ZP
8 5 203-0001 1/4” FLAT WASHER, ZP
9 1 107-2982 TUBE,5/8 OD(.120W) X 5/8 INCH
10 2 201-0553 1/4-20 X 1/2” HX.WSHD.TYPE F TCS, ZP
11 2 201-0192 #10-32 X 1/2” SLOT, RD. HD. SCREW
12 2 203-0054 #10 LOCK WASHER
13 2 202-0047 #10-32 HEX NUT
14 2 101-5822 ADAPTER, 4 WAY CONNECTOR
15 2 62-3468 ATT TAB ASSY, SF/SB
4 61-5208 WLD, NUT PLT, 1/4X1X1, 3/8”/14”WIRE (not shown)
4 201-0443 3/8-16 X 1 HEX BOLT GRD.5, ZP (not shown)
3 201-0654 #10-16 X 1” SELF DRILLING SCREW (not shown)
4 203-0010 3/8 LOCK WASHER, ZP (not shown)
2 229-0359 QUICKLINK, 3/8”, ZP (not shown)
2 226-0046 BASEPLATE SAFETY CABLE, 36” CL III (not shown)
2 290-0437 RECEIVER, CAP PLUG (BLK) (not shown)
Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is
lost or in need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the
same grade (In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be ordered through
your nearest Blue Ox® Dealer or Distributor. Failing to follow and/or altering these installation instructions in either installation or
required equipment will void the manufacturer’s warranty. Towing behind a non-motorized vehicle will void the warranty.